This is a note to let you know that I've just added the patch titled leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver to the 6.2-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: leds-simatic-ipc-leds-gpio-make-sure-we-have-the-gpi.patch and it can be found in the queue-6.2 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 5af8492e5c6e8f8a654daa96b76390e70b66e908 Author: Henning Schild <henning.schild@xxxxxxxxxxx> Date: Fri Oct 7 17:33:23 2022 +0200 leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver [ Upstream commit c64964ebee2a415384385205950ee7a05f78451e ] If we register a "leds-gpio" platform device for GPIO pins that do not exist we get a -EPROBE_DEFER and the probe will be tried again later. If there is no driver to provide that pin we will poll forever and also create a lot of log messages. So check if that GPIO driver is configured, if so it will come up eventually. If not, we exit our probe function early and do not even bother registering the "leds-gpio". This method was chosen over "Kconfig depends" since this way we can add support for more devices and GPIO backends more easily without "depends":ing on all GPIO backends. Fixes: a6c80bec3c93 ("leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver") Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Signed-off-by: Lee Jones <lee@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221007153323.1326-1-henning.schild@xxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c index 07f0d79d604d4..e8d329b5a68c3 100644 --- a/drivers/leds/simple/simatic-ipc-leds-gpio.c +++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c @@ -77,6 +77,8 @@ static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev) switch (plat->devmode) { case SIMATIC_IPC_DEVICE_127E: + if (!IS_ENABLED(CONFIG_PINCTRL_BROXTON)) + return -ENODEV; simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_127e; break; case SIMATIC_IPC_DEVICE_227G: