This is a note to let you know that I've just added the patch titled hwmon: (ftsteutates) Fix scaling of measurements to the 6.2-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: hwmon-ftsteutates-fix-scaling-of-measurements.patch and it can be found in the queue-6.2 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 2cfa8c06071761399e12fdc570c5453d00949f00 Author: Armin Wolf <W_Armin@xxxxxx> Date: Sat Dec 24 05:18:53 2022 +0100 hwmon: (ftsteutates) Fix scaling of measurements [ Upstream commit ca8fd8c16a8b77dfcf7f6ce52d2c863220693a78 ] A user complained that the ftsteutates driver was displaying bogus values since its introduction. This happens because the sensor measurements need to be scaled in order to produce meaningful results: - the fan speed needs to be multiplied by 60 since its in RPS - the temperature is in degrees celsius and needs an offset of 64 - the voltage is in 1/256 of 3.3V The offical datasheet says the voltage needs to be divided by 256, but this is likely an off-by-one-error, since even the BIOS devides by 255 (otherwise 3.3V could not be measured). The voltage channels additionally need a board-specific multiplier, however this can be done by the driver since its board-specific. The reason the missing scaling of measurements is the way Fujitsu used this driver when it was still out-of-tree. Back then, all scaling was done in userspace by libsensors, even the generic one. Tested on a Fujitsu DS3401-B1. Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"") Signed-off-by: Armin Wolf <W_Armin@xxxxxx> Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@xxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/Documentation/hwmon/ftsteutates.rst b/Documentation/hwmon/ftsteutates.rst index 58a2483d8d0da..198fa8e2819da 100644 --- a/Documentation/hwmon/ftsteutates.rst +++ b/Documentation/hwmon/ftsteutates.rst @@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and 8 fans. It also contains an integrated watchdog which is currently implemented in this driver. +The 4 voltages require a board-specific multiplier, since the BMC can +only measure voltages up to 3.3V and thus relies on voltage dividers. +Consult your motherboard manual for details. + To clear a temperature or fan alarm, execute the following command with the correct path to the alarm file:: diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c index f5b8e724a8ca1..ffa0bb3648775 100644 --- a/drivers/hwmon/ftsteutates.c +++ b/drivers/hwmon/ftsteutates.c @@ -12,6 +12,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/jiffies.h> +#include <linux/math.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/slab.h> @@ -347,13 +348,15 @@ static ssize_t in_value_show(struct device *dev, { struct fts_data *data = dev_get_drvdata(dev); int index = to_sensor_dev_attr(devattr)->index; - int err; + int value, err; err = fts_update_device(data); if (err < 0) return err; - return sprintf(buf, "%u\n", data->volt[index]); + value = DIV_ROUND_CLOSEST(data->volt[index] * 3300, 255); + + return sprintf(buf, "%d\n", value); } static ssize_t temp_value_show(struct device *dev, @@ -361,13 +364,15 @@ static ssize_t temp_value_show(struct device *dev, { struct fts_data *data = dev_get_drvdata(dev); int index = to_sensor_dev_attr(devattr)->index; - int err; + int value, err; err = fts_update_device(data); if (err < 0) return err; - return sprintf(buf, "%u\n", data->temp_input[index]); + value = (data->temp_input[index] - 64) * 1000; + + return sprintf(buf, "%d\n", value); } static ssize_t temp_fault_show(struct device *dev, @@ -436,13 +441,15 @@ static ssize_t fan_value_show(struct device *dev, { struct fts_data *data = dev_get_drvdata(dev); int index = to_sensor_dev_attr(devattr)->index; - int err; + int value, err; err = fts_update_device(data); if (err < 0) return err; - return sprintf(buf, "%u\n", data->fan_input[index]); + value = data->fan_input[index] * 60; + + return sprintf(buf, "%d\n", value); } static ssize_t fan_source_show(struct device *dev,