This is a note to let you know that I've just added the patch titled thermal/drivers/tsens: limit num_sensors to 9 for msm8939 to the 6.2-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: thermal-drivers-tsens-limit-num_sensors-to-9-for-msm.patch and it can be found in the queue-6.2 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 817f91430b57b2e4b20a5d0a5e4773d16326e525 Author: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Date: Sun Jan 1 21:40:22 2023 +0200 thermal/drivers/tsens: limit num_sensors to 9 for msm8939 [ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ] On msm8939 last (hwid=10) sensor was added in the hw revision 3.0. Calibration data for it was placed outside of the main calibration data blob, so it is not accessible by the current blob-parsing code. Moreover data for the sensor's p2 is not contiguous in the fuses. This makes it hard to use nvmem_cell API to parse calibration data in a generic way. Since the sensor doesn't seem to be actually used by the existing hardware, disable the sensor for now. Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> Acked-by: Shawn Guo <shawn.guo@xxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@xxxxxxxxxx Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index af2659037f010..3158f13c54305 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -285,7 +285,7 @@ static int calibrate_8939(struct tsens_priv *priv) u32 p1[10], p2[10]; int mode = 0; u32 *qfprom_cdata; - u32 cdata[6]; + u32 cdata[4]; qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); if (IS_ERR(qfprom_cdata)) @@ -296,8 +296,6 @@ static int calibrate_8939(struct tsens_priv *priv) cdata[1] = qfprom_cdata[13]; cdata[2] = qfprom_cdata[0]; cdata[3] = qfprom_cdata[1]; - cdata[4] = qfprom_cdata[22]; - cdata[5] = qfprom_cdata[21]; mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT; dev_dbg(priv->dev, "calibration mode is %d\n", mode); @@ -314,8 +312,6 @@ static int calibrate_8939(struct tsens_priv *priv) p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT; p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT; p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT; - p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4; - p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5; for (i = 0; i < priv->num_sensors; i++) p2[i] = (base1 + p2[i]) << 2; fallthrough; @@ -331,7 +327,6 @@ static int calibrate_8939(struct tsens_priv *priv) p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT; p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT; p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT; - p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT; for (i = 0; i < priv->num_sensors; i++) p1[i] = ((base0) + p1[i]) << 2; break; @@ -544,7 +539,7 @@ static int __init init_8939(struct tsens_priv *priv) { priv->sensor[6].slope = 2833; priv->sensor[7].slope = 2838; priv->sensor[8].slope = 2840; - priv->sensor[9].slope = 2852; + /* priv->sensor[9].slope = 2852; */ return init_common(priv); } @@ -620,9 +615,9 @@ static const struct tsens_ops ops_8939 = { }; struct tsens_plat_data data_8939 = { - .num_sensors = 10, + .num_sensors = 9, .ops = &ops_8939, - .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 }, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ }, .feat = &tsens_v0_1_feat, .fields = tsens_v0_1_regfields,