This is a note to let you know that I've just added the patch titled
net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-stmmac-do-not-stop-rx_clk-in-rx-lpi-state-for-qc.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit d797b079554af2cc4a488e16f79ba503eb7dd1f2
Author: Andrey Konovalov <andrey.konovalov@xxxxxxxxxx>
Date: Fri Jan 27 00:35:39 2023 +0300
net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC
[ Upstream commit 54aa39a513dbf2164ca462a19f04519b2407a224 ]
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index bfc4a92f1d92b..78be62ecc9a9a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -505,6 +505,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
plat_dat->has_gmac4 = 1;
plat_dat->pmt = 1;
plat_dat->tso_en = of_property_read_bool(np, "snps,tso");
+ if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
+ plat_dat->rx_clk_runs_in_lpi = 1;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3079e52546663..6a3b0f76d9729 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -932,7 +932,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
stmmac_mac_set(priv, priv->ioaddr, true);
if (phy && priv->dma_cap.eee) {
- priv->eee_active = phy_init_eee(phy, 1) >= 0;
+ priv->eee_active =
+ phy_init_eee(phy, !priv->plat->rx_clk_runs_in_lpi) >= 0;
priv->eee_enabled = stmmac_eee_init(priv);
stmmac_set_eee_pls(priv, priv->hw, true);
}
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0b35747c9837a..88b107e20fc7c 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -178,6 +178,7 @@ struct plat_stmmacenet_data {
int rss_en;
int mac_port_sel_speed;
bool en_tx_lpi_clockgating;
+ bool rx_clk_runs_in_lpi;
int has_xgmac;
bool sph_disable;
};
