This is a note to let you know that I've just added the patch titled iio:adc:twl6030: Enable measurements of VUSB, VBAT and others to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: iio-adc-twl6030-enable-measurements-of-vusb-vbat-and-others.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From f804bd0dc28683a93a60f271aaefb2fc5b0853dd Mon Sep 17 00:00:00 2001 From: Andreas Kemnade <andreas@xxxxxxxxxxxx> Date: Thu, 1 Dec 2022 19:16:35 +0100 Subject: iio:adc:twl6030: Enable measurements of VUSB, VBAT and others From: Andreas Kemnade <andreas@xxxxxxxxxxxx> commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream. Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@xxxxxxxxxxxx Cc: <Stable@xxxxxxxxxxxxxxx> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/iio/adc/twl6030-gpadc.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -57,6 +57,18 @@ #define TWL6030_GPADCS BIT(1) #define TWL6030_GPADCR BIT(0) +#define USB_VBUS_CTRL_SET 0x04 +#define USB_ID_CTRL_SET 0x06 + +#define TWL6030_MISC1 0xE4 +#define VBUS_MEAS 0x01 +#define ID_MEAS 0x01 + +#define VAC_MEAS 0x04 +#define VBAT_MEAS 0x02 +#define BB_MEAS 0x01 + + /** * struct twl6030_chnl_calib - channel calibration * @gain: slope coefficient for ideal curve @@ -927,6 +939,26 @@ static int twl6030_gpadc_probe(struct pl return ret; } + ret = twl_i2c_write_u8(TWL_MODULE_USB, VBUS_MEAS, USB_VBUS_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL_MODULE_USB, ID_MEAS, USB_ID_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, + VBAT_MEAS | BB_MEAS | BB_MEAS, + TWL6030_MISC1); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + indio_dev->name = DRIVER_NAME; indio_dev->info = &twl6030_gpadc_iio_info; indio_dev->modes = INDIO_DIRECT_MODE; Patches currently in stable-queue which might be from andreas@xxxxxxxxxxxx are queue-5.15/iio-adc-twl6030-enable-measurements-of-vusb-vbat-and-others.patch