This is a note to let you know that I've just added the patch titled
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-mdio-mux-meson-g12a-force-internal-phy-off-on-mu.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 91136a014fad5de37a9a37c37cc93d3795fc12be
Author: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Date: Tue Jan 24 11:11:57 2023 +0100
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
[ Upstream commit 7083df59abbc2b7500db312cac706493be0273ff ]
Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.
Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@xxxxxxxxxxx>
Co-developed-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@xxxxxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/mdio/mdio-mux-meson-g12a.c b/drivers/net/mdio/mdio-mux-meson-g12a.c
index 4a2e94faf57e..c4542ecf5623 100644
--- a/drivers/net/mdio/mdio-mux-meson-g12a.c
+++ b/drivers/net/mdio/mdio-mux-meson-g12a.c
@@ -4,6 +4,7 @@
*/
#include <linux/bitfield.h>
+#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
@@ -150,6 +151,7 @@ static const struct clk_ops g12a_ephy_pll_ops = {
static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
{
+ u32 value;
int ret;
/* Enable the phy clock */
@@ -163,18 +165,25 @@ static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
/* Initialize ephy control */
writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
- writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
- FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
- FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
- PHY_CNTL1_CLK_EN |
- PHY_CNTL1_CLKFREQ |
- PHY_CNTL1_PHY_ENB,
- priv->regs + ETH_PHY_CNTL1);
+
+ /* Make sure we get a 0 -> 1 transition on the enable bit */
+ value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
+ FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
+ FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
+ PHY_CNTL1_CLK_EN |
+ PHY_CNTL1_CLKFREQ;
+ writel(value, priv->regs + ETH_PHY_CNTL1);
writel(PHY_CNTL2_USE_INTERNAL |
PHY_CNTL2_SMI_SRC_MAC |
PHY_CNTL2_RX_CLK_EPHY,
priv->regs + ETH_PHY_CNTL2);
+ value |= PHY_CNTL1_PHY_ENB;
+ writel(value, priv->regs + ETH_PHY_CNTL1);
+
+ /* The phy needs a bit of time to power up */
+ mdelay(10);
+
return 0;
}
