This is a note to let you know that I've just added the patch titled
serial: exar: Add support for Sealevel 7xxxC serial cards
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-exar-add-support-for-sealevel-7xxxc-serial-cards.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 14ee78d5932afeb710c8305196a676a715bfdea8 Mon Sep 17 00:00:00 2001
From: Matthew Howell <matthew.howell@xxxxxxxxxxxx>
Date: Thu, 19 Jan 2023 14:40:29 -0500
Subject: serial: exar: Add support for Sealevel 7xxxC serial cards
From: Matthew Howell <matthew.howell@xxxxxxxxxxxx>
commit 14ee78d5932afeb710c8305196a676a715bfdea8 upstream.
Add support for Sealevel 7xxxC serial cards.
This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.
Signed-off-by: Matthew Howell <matthew.howell@xxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxx>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_exar.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -43,6 +43,12 @@
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+#define PCI_DEVICE_ID_SEALEVEL_710xC 0x1001
+#define PCI_DEVICE_ID_SEALEVEL_720xC 0x1002
+#define PCI_DEVICE_ID_SEALEVEL_740xC 0x1004
+#define PCI_DEVICE_ID_SEALEVEL_780xC 0x1008
+#define PCI_DEVICE_ID_SEALEVEL_716xC 0x1010
+
#define UART_EXAR_INT0 0x80
#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
@@ -638,6 +644,8 @@ exar_pci_probe(struct pci_dev *pcidev, c
nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
else if (board->num_ports)
nr_ports = board->num_ports;
+ else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
+ nr_ports = pcidev->device & 0xff;
else
nr_ports = pcidev->device & 0x0f;
@@ -864,6 +872,12 @@ static const struct pci_device_id exar_p
EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
+
+ EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
{ 0, }
};
MODULE_DEVICE_TABLE(pci, exar_pci_tbl);
Patches currently in stable-queue which might be from matthew.howell@xxxxxxxxxxxx are
queue-6.1/serial-exar-add-support-for-sealevel-7xxxc-serial-cards.patch
