This is a note to let you know that I've just added the patch titled arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength to the 6.0-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-qcom-sdm845-db845c-correct-spi2-pins-drive-strength.patch and it can be found in the queue-6.0 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 9905370560d9c29adc15f4937c5a0c0dac05f0b4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Date: Mon, 10 Oct 2022 07:44:13 -0400 Subject: arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> commit 9905370560d9c29adc15f4937c5a0c0dac05f0b4 upstream. The pin configuration (done with generic pin controller helpers and as expressed by bindings) requires children nodes with either: 1. "pins" property and the actual configuration, 2. another set of nodes with above point. The qup_spi2_default pin configuration uses alreaady the second method with a "pinmux" child, so configure drive-strength similarly in "pinconf". Otherwise the PIN drive strength would not be applied. Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1123,7 +1123,10 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi2_default { - drive-strength = <16>; + pinconf { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + drive-strength = <16>; + }; }; &qup_uart3_default{ Patches currently in stable-queue which might be from krzysztof.kozlowski@xxxxxxxxxx are queue-6.0/soc-qcom-select-remap_mmio-for-icc_bwmon-driver.patch queue-6.0/arm64-dts-qcom-sdm850-lenovo-yoga-c630-correct-i2c12-pins-drive-strength.patch queue-6.0/arm64-dts-qcom-sdm850-samsung-w737-correct-i2c12-pins-drive-strength.patch queue-6.0/arm64-dts-qcom-sdm845-db845c-correct-spi2-pins-drive-strength.patch