This is a note to let you know that I've just added the patch titled phy: qcom-qmp-pcie: drop bogus register update to the 6.1-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: phy-qcom-qmp-pcie-drop-bogus-register-update.patch and it can be found in the queue-6.1 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 41e17ea2a6903f7a5460d5d5319a3448f74be509 Author: Johan Hovold <johan+linaro@xxxxxxxxxx> Date: Mon Oct 17 08:50:13 2022 +0200 phy: qcom-qmp-pcie: drop bogus register update [ Upstream commit 2d93887cb4bac0a36ce9e146956f631ab7994680 ] Since commit 0d58280cf1e6 ("phy: Update PHY power control sequence") the PHY is powered on before configuring the registers and only the MSM8996 PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS initialisation table, may possibly require a second update afterwards. To make things worse, the POWER_DOWN_CONTROL register lies at a different offset on more recent SoCs so that the second update, which still used a hard-coded offset, would write to an unrelated register (e.g. a revision-id register on SC8280XP). As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop the bogus register update. Fixes: e4d8b05ad5f9 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> #RB3 Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221017065013.19647-12-johan+linaro@xxxxxxxxxx Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 5be5348fbb26..9c8c30ee7c71 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -1975,12 +1975,6 @@ static int qmp_pcie_power_on(struct phy *phy) qmp_pcie_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl, cfg->pcs_misc_tbl_num); qmp_pcie_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec, cfg->pcs_misc_tbl_num_sec); - /* - * Pull out PHY from POWER DOWN state. - * This is active low enable signal to power-down PHY. - */ - qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); - if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);