This is a note to let you know that I've just added the patch titled net: amd-xgbe: Fix logic around active and passive cables to the 6.1-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-amd-xgbe-fix-logic-around-active-and-passive-cab.patch and it can be found in the queue-6.1 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 6d8d577174b0f4cf1b13f07c97ee7fa6c55f8683 Author: Tom Lendacky <thomas.lendacky@xxxxxxx> Date: Thu Dec 8 10:22:24 2022 -0600 net: amd-xgbe: Fix logic around active and passive cables [ Upstream commit 4998006c73afe44e2f639d55bd331c6c26eb039f ] SFP+ active and passive cables are copper cables with fixed SFP+ end connectors. Due to a misinterpretation of this, SFP+ active cables could end up not being recognized, causing the driver to fail to establish a connection. Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is the default cable type, and handle active and passive cables when they are specifically detected. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@xxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index 4064c3e3dd49..868a768f424c 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -189,6 +189,7 @@ enum xgbe_sfp_cable { XGBE_SFP_CABLE_UNKNOWN = 0, XGBE_SFP_CABLE_ACTIVE, XGBE_SFP_CABLE_PASSIVE, + XGBE_SFP_CABLE_FIBER, }; enum xgbe_sfp_base { @@ -1149,16 +1150,18 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) phy_data->sfp_tx_fault = xgbe_phy_check_sfp_tx_fault(phy_data); phy_data->sfp_rx_los = xgbe_phy_check_sfp_rx_los(phy_data); - /* Assume ACTIVE cable unless told it is PASSIVE */ + /* Assume FIBER cable unless told otherwise */ if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_PASSIVE) { phy_data->sfp_cable = XGBE_SFP_CABLE_PASSIVE; phy_data->sfp_cable_len = sfp_base[XGBE_SFP_BASE_CU_CABLE_LEN]; - } else { + } else if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_ACTIVE) { phy_data->sfp_cable = XGBE_SFP_CABLE_ACTIVE; + } else { + phy_data->sfp_cable = XGBE_SFP_CABLE_FIBER; } /* Determine the type of SFP */ - if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE && + if (phy_data->sfp_cable != XGBE_SFP_CABLE_FIBER && xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) phy_data->sfp_base = XGBE_SFP_BASE_10000_CR; else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)