This is a note to let you know that I've just added the patch titled arm64: dts: renesas: r8a779f0: Fix SCIF "brg_int" clock to the 6.1-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-renesas-r8a779f0-fix-scif-brg_int-clock.patch and it can be found in the queue-6.1 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit e83f32d9c5675f23173172355246d825e0e86994 Author: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Date: Thu Nov 3 15:34:40 2022 +0100 arm64: dts: renesas: r8a779f0: Fix SCIF "brg_int" clock [ Upstream commit 64416ef0b0c4d73349035d1b3206eed3d2047ee0 ] As serial communication requires a clean clock signal, the Serial Communication Interfaces with FIFO (SCIF) are clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the clock input for the SCIF Baud Rate Generator internal clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81. Fixes: c62331e8222f ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support") Fixes: 40753144256b ("arm64: dts: renesas: r8a779f0: Add SCIF nodes") Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20221103143440.46449-5-wsa+renesas@xxxxxxxxxxxxxxxxxxxx Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 3be577dc9a93..4092c0016035 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -657,7 +657,7 @@ scif0: serial@e6e60000 { reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>, - <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x51>, <&dmac0 0x50>, @@ -674,7 +674,7 @@ scif1: serial@e6e68000 { reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, - <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x53>, <&dmac0 0x52>, @@ -691,7 +691,7 @@ scif3: serial@e6c50000 { reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>, - <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>, @@ -708,7 +708,7 @@ scif4: serial@e6c40000 { reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 705>, - <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>,