Patch "spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock" has been added to the 5.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock

to the 5.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     spi-spi-imx-fix-spi_bus_clk-if-requested-clock-is-hi.patch
and it can be found in the queue-5.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 1bf190d0480db9dbd01564caa684ef529f14b3b5
Author: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Date:   Tue Nov 15 19:10:00 2022 +0100

    spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock
    
    [ Upstream commit db2d2dc9a0b58c6faefb6b002fdbed4f0362d1a4 ]
    
    In case the requested bus clock is higher than the input clock, the correct
    dividers (pre = 0, post = 0) are returned from mx51_ecspi_clkdiv(), but
    *fres is left uninitialized and therefore contains an arbitrary value.
    
    This causes trouble for the recently introduced PIO polling feature as the
    value in spi_imx->spi_bus_clk is used there to calculate for which
    transfers to enable PIO polling.
    
    Fix this by setting *fres even if no clock dividers are in use.
    
    This issue was observed on Kontron BL i.MX8MM with an SPI peripheral clock set
    to 50 MHz by default and a requested SPI bus clock of 80 MHz for the SPI NOR
    flash.
    
    With the fix applied the debug message from mx51_ecspi_clkdiv() now prints the
    following:
    
    spi_imx 30820000.spi: mx51_ecspi_clkdiv: fin: 50000000, fspi: 50000000,
    post: 0, pre: 0
    
    Fixes: 6fd8b8503a0d ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds")
    Fixes: 07e759387788 ("spi: spi-imx: add PIO polling support")
    Cc: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
    Cc: David Jander <david@xxxxxxxxxxx>
    Cc: Fabio Estevam <festevam@xxxxxxxxx>
    Cc: Mark Brown <broonie@xxxxxxxxxx>
    Cc: Marek Vasut <marex@xxxxxxx>
    Cc: stable@xxxxxxxxxxxxxxx
    Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
    Tested-by: Fabio Estevam <festevam@xxxxxxxxx>
    Acked-by: Marek Vasut <marex@xxxxxxx>
    Link: https://lore.kernel.org/r/20221115181002.2068270-1-frieder@xxxxxxx
    Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 0e3bc0b0a526..74b3b6ca15ef 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -434,8 +434,7 @@ static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
 	unsigned int pre, post;
 	unsigned int fin = spi_imx->spi_clk;
 
-	if (unlikely(fspi > fin))
-		return 0;
+	fspi = min(fspi, fin);
 
 	post = fls(fin) - fls(fspi);
 	if (fin > fspi << post)



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux