Patch "serial: stm32: Factor out GPIO RTS toggling into separate function" has been added to the 5.15-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    serial: stm32: Factor out GPIO RTS toggling into separate function

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     serial-stm32-factor-out-gpio-rts-toggling-into-separ.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 72dc7efee51074a225b188d250ea3025bed5f36e
Author: Marek Vasut <marex@xxxxxxx>
Date:   Sat Apr 30 18:28:44 2022 +0200

    serial: stm32: Factor out GPIO RTS toggling into separate function
    
    [ Upstream commit 3bcea529b295a993b1b05db63f245ae8030c5acf ]
    
    Pull out the GPIO RTS enable and disable handling into separate function.
    Limit the scope of GPIO RTS toggling only to GPIO emulated RS485 too.
    
    Signed-off-by: Marek Vasut <marex@xxxxxxx>
    Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
    Cc: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
    Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
    Cc: Jean Philippe Romain <jean-philippe.romain@xxxxxxxxxxx>
    Cc: Valentin Caron <valentin.caron@xxxxxxxxxxx>
    Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
    Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
    To: linux-serial@xxxxxxxxxxxxxxx
    Link: https://lore.kernel.org/r/20220430162845.244655-1-marex@xxxxxxx
    Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
    Stable-dep-of: adafbbf6895e ("serial: stm32: Deassert Transmit Enable on ->rs485_config()")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index fc166cc2c856..a1092a8a8243 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -325,6 +325,42 @@ static void stm32_usart_tx_interrupt_disable(struct uart_port *port)
 		stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 }
 
+static void stm32_usart_rs485_rts_enable(struct uart_port *port)
+{
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	struct serial_rs485 *rs485conf = &port->rs485;
+
+	if (stm32_port->hw_flow_control ||
+	    !(rs485conf->flags & SER_RS485_ENABLED))
+		return;
+
+	if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
+		mctrl_gpio_set(stm32_port->gpios,
+			       stm32_port->port.mctrl | TIOCM_RTS);
+	} else {
+		mctrl_gpio_set(stm32_port->gpios,
+			       stm32_port->port.mctrl & ~TIOCM_RTS);
+	}
+}
+
+static void stm32_usart_rs485_rts_disable(struct uart_port *port)
+{
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	struct serial_rs485 *rs485conf = &port->rs485;
+
+	if (stm32_port->hw_flow_control ||
+	    !(rs485conf->flags & SER_RS485_ENABLED))
+		return;
+
+	if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
+		mctrl_gpio_set(stm32_port->gpios,
+			       stm32_port->port.mctrl & ~TIOCM_RTS);
+	} else {
+		mctrl_gpio_set(stm32_port->gpios,
+			       stm32_port->port.mctrl | TIOCM_RTS);
+	}
+}
+
 static void stm32_usart_transmit_chars_pio(struct uart_port *port)
 {
 	struct stm32_port *stm32_port = to_stm32_port(port);
@@ -567,40 +603,21 @@ static void stm32_usart_disable_ms(struct uart_port *port)
 static void stm32_usart_stop_tx(struct uart_port *port)
 {
 	struct stm32_port *stm32_port = to_stm32_port(port);
-	struct serial_rs485 *rs485conf = &port->rs485;
 
 	stm32_usart_tx_interrupt_disable(port);
 
-	if (rs485conf->flags & SER_RS485_ENABLED) {
-		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl & ~TIOCM_RTS);
-		} else {
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl | TIOCM_RTS);
-		}
-	}
+	stm32_usart_rs485_rts_disable(port);
 }
 
 /* There are probably characters waiting to be transmitted. */
 static void stm32_usart_start_tx(struct uart_port *port)
 {
-	struct stm32_port *stm32_port = to_stm32_port(port);
-	struct serial_rs485 *rs485conf = &port->rs485;
 	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) && !port->x_char)
 		return;
 
-	if (rs485conf->flags & SER_RS485_ENABLED) {
-		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl | TIOCM_RTS);
-		} else {
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl & ~TIOCM_RTS);
-		}
-	}
+	stm32_usart_rs485_rts_enable(port);
 
 	stm32_usart_transmit_chars(port);
 }