This is a note to let you know that I've just added the patch titled ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-at91-sam9g20ek-enable-udc-vbus-gpio-pinctrl.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 610d844fbb6f815dbd1c97d2eccb7b46636fef61 Author: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> Date: Mon Nov 14 19:59:23 2022 +0100 ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl [ Upstream commit 40a2226e8bfacb79dd154dea68febeead9d847e9 ] We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@xxxxxxxxxxxxx Cc: ludovic.desroches@xxxxxxxxxxxxx Cc: alexandre.belloni@xxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: kernel@xxxxxxxxxxxxxx Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@xxxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 27847a47c108..1b326a0a2c92 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ pinctrl_pck0_as_mck: pck0_as_mck { }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -72,6 +79,8 @@ macb0: ethernet@fffc4000 { }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; };