This is a note to let you know that I've just added the patch titled
arm64: dts: rockchip: fix quartz64-a bluetooth configuration
to the 6.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-rockchip-fix-quartz64-a-bluetooth-configur.patch
and it can be found in the queue-6.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 7bdab3e72cdc0c77f293cbc8f71ad33cb3a7302a
Author: Lev Popov <leo@xxxxxxxxx>
Date: Mon Sep 26 14:53:48 2022 +0200
arm64: dts: rockchip: fix quartz64-a bluetooth configuration
[ Upstream commit 2dcd7e0c821fe9b663f7d3382b6d2faa8edf2129 ]
For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.
Also set max-speed on the bluetooth device as it's not automatically
detected.
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Lev Popov <leo@xxxxxxxxx>
Link: https://lore.kernel.org/r/20220926125350.64783-1-leo@xxxxxxxxx
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..25a8c781f4e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@ &uart0 {
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
status = "okay";
uart-has-rtscts;
@@ -748,13 +748,14 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
vbat-supply = <&vcc_sys>;
vddio-supply = <&vcca1v8_pmu>;
+ max-speed = <3000000>;
};
};
