This is a note to let you know that I've just added the patch titled
arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
to the 6.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-qcom-sa8155p-adp-specify-which-ldo-modes-a.patch
and it can be found in the queue-6.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 0452862f7460d42b5fb489eea7341dccf58f365b
Author: Douglas Anderson <dianders@xxxxxxxxxxxx>
Date: Mon Aug 29 09:49:47 2022 -0700
arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
[ Upstream commit bd9f3dcf42d943b53190f99bcdbcfe98a56ac4cd ]
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
NOTE: while here, let's also remove the nonsensical
"regulator-allow-set-load" on the fixed regulator "vreg_s4a_1p8".
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220829094903.v2.1.Id59c32b560c4662d8b3697de2bd494d08d654806@changeid
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ba547ca9fc6b..ddb9cb182152 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
regulator-always-on;
regulator-boot-on;
- regulator-allow-set-load;
vin-supply = <&vreg_3p3>;
};
@@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
