This is a note to let you know that I've just added the patch titled
mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
to the 6.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-brcmstb-fix-sdhci_reset_all-for-cqhci.patch
and it can be found in the queue-6.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 56baa208f91061ff27ec2d93fbc483f624d373b4 Mon Sep 17 00:00:00 2001
From: Brian Norris <briannorris@xxxxxxxxxxxx>
Date: Wed, 26 Oct 2022 12:42:05 -0700
Subject: mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
From: Brian Norris <briannorris@xxxxxxxxxxxx>
commit 56baa208f91061ff27ec2d93fbc483f624d373b4 upstream.
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
I only patch the bcm7216 variant even though others potentially *could*
provide the 'supports-cqe' property (and thus enable CQHCI), because
d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing
(CQE)") and some Broadcom folks confirm that only the 7216 variant
actually supports it.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20221026124150.v4.3.I6a715feab6d01f760455865e968ecf0d85036018@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-brcmstb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -12,6 +12,7 @@
#include <linux/bitops.h>
#include <linux/delay.h>
+#include "sdhci-cqhci.h"
#include "sdhci-pltfm.h"
#include "cqhci.h"
@@ -55,7 +56,7 @@ static void brcmstb_reset(struct sdhci_h
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
- sdhci_reset(host, mask);
+ sdhci_and_cqhci_reset(host, mask);
/* Reset will clear this, so re-enable it */
if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
Patches currently in stable-queue which might be from briannorris@xxxxxxxxxxxx are
queue-6.0/mmc-sdhci_am654-fix-sdhci_reset_all-for-cqhci.patch
queue-6.0/mmc-sdhci-brcmstb-fix-sdhci_reset_all-for-cqhci.patch
queue-6.0/mmc-sdhci-of-arasan-fix-sdhci_reset_all-for-cqhci.patch
queue-6.0/mmc-sdhci-tegra-fix-sdhci_reset_all-for-cqhci.patch
queue-6.0/mmc-cqhci-provide-helper-for-resetting-both-sdhci-and-cqhci.patch
