This is a note to let you know that I've just added the patch titled ethernet: s2io: disable napi when start nic failed in s2io_card_up() to the 6.0-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: ethernet-s2io-disable-napi-when-start-nic-failed-in-.patch and it can be found in the queue-6.0 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 6ef482a946e77bba1dc76b5e8305a0caa71a83ea Author: Zhengchao Shao <shaozhengchao@xxxxxxxxxx> Date: Wed Nov 9 10:37:41 2022 +0800 ethernet: s2io: disable napi when start nic failed in s2io_card_up() [ Upstream commit 0348c1ab980c1d43fb37b758d4b760990c066cb5 ] When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by: Zhengchao Shao <shaozhengchao@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@xxxxxxxxxx Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 30f955efa830..8f74c039b3be 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -7128,9 +7128,8 @@ static int s2io_card_up(struct s2io_nic *sp) if (ret) { DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n", dev->name); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENOMEM; + ret = -ENOMEM; + goto err_fill_buff; } DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, ring->rx_bufs_left); @@ -7168,18 +7167,16 @@ static int s2io_card_up(struct s2io_nic *sp) /* Enable Rx Traffic and interrupts on the NIC */ if (start_nic(sp)) { DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENODEV; + ret = -ENODEV; + goto err_out; } /* Add interrupt service routine */ if (s2io_add_isr(sp) != 0) { if (sp->config.intr_type == MSI_X) s2io_rem_isr(sp); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENODEV; + ret = -ENODEV; + goto err_out; } timer_setup(&sp->alarm_timer, s2io_alarm_handle, 0); @@ -7199,6 +7196,20 @@ static int s2io_card_up(struct s2io_nic *sp) } return 0; + +err_out: + if (config->napi) { + if (config->intr_type == MSI_X) { + for (i = 0; i < sp->config.rx_ring_num; i++) + napi_disable(&sp->mac_control.rings[i].napi); + } else { + napi_disable(&sp->napi); + } + } +err_fill_buff: + s2io_reset(sp); + free_rx_buffers(sp); + return ret; } /**