This is a note to let you know that I've just added the patch titled arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers to the 6.0-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-ls208xa-specify-clock-frequencies-for-the-.patch and it can be found in the queue-6.0 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 632f86fa7bcfc032658e76c49955532b85ba7a3f Author: Ioana Ciornei <ioana.ciornei@xxxxxxx> Date: Tue Oct 25 17:41:17 2022 +0300 arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers [ Upstream commit d5c921a53c80dfa942f6dff36253db5a50775a5f ] Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes") Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d76f1c42f3fa..7bb33933c2cb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -533,6 +533,9 @@ emdio1: mdio@8b96000 { little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -542,6 +545,9 @@ emdio2: mdio@8b97000 { little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };