This is a note to let you know that I've just added the patch titled
net: phy: dp83822: disable MDI crossover status change interrupt
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-phy-dp83822-disable-mdi-crossover-status-change-.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 3e3da7b204b323fad2e25355323618b85bef3a96
Author: Felix Riemann <felix.riemann@xxxxxx>
Date: Tue Oct 18 12:47:54 2022 +0200
net: phy: dp83822: disable MDI crossover status change interrupt
[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ]
If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.
As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@xxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@xxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 3a8849716459..db651649e0b8 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -268,8 +268,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
DP83822_EEE_ERROR_CHANGE_INT_EN);
if (!dp83822->fx_enabled)
- misr_status |= DP83822_MDI_XOVER_INT_EN |
- DP83822_ANEG_ERR_INT_EN |
+ misr_status |= DP83822_ANEG_ERR_INT_EN |
DP83822_WOL_PKT_INT_EN;
err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
