This is a note to let you know that I've just added the patch titled
serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-stm32-use-tc-interrupt-to-deassert-gpio-rts-i.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 6fa778f8c0f1bc1bad754c6fca14cb758de84258
Author: Marek Vasut <marex@xxxxxxx>
Date: Sat Apr 30 18:28:45 2022 +0200
serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
[ Upstream commit d7c76716169ddc37cf6316ff381d34ea807fbfd7 ]
In case the RS485 mode is emulated using GPIO RTS, use the TC interrupt
to deassert the GPIO RTS, otherwise the GPIO RTS stays asserted after a
transmission ended and the RS485 cannot work.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jean Philippe Romain <jean-philippe.romain@xxxxxxxxxxx>
Cc: Valentin Caron <valentin.caron@xxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
To: linux-serial@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20220430162845.244655-2-marex@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Stable-dep-of: adafbbf6895e ("serial: stm32: Deassert Transmit Enable on ->rs485_config()")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 0e7bcbaf7268..4a4108ef23e8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -402,6 +402,14 @@ static void stm32_usart_tx_interrupt_enable(struct uart_port *port)
stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE);
}
+static void stm32_usart_tc_interrupt_enable(struct uart_port *port)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TCIE);
+}
+
static void stm32_usart_rx_dma_complete(void *arg)
{
struct uart_port *port = arg;
@@ -420,6 +428,14 @@ static void stm32_usart_tx_interrupt_disable(struct uart_port *port)
stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
}
+static void stm32_usart_tc_interrupt_disable(struct uart_port *port)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TCIE);
+}
+
static void stm32_usart_rs485_rts_enable(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
@@ -557,6 +573,13 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
u32 isr;
int ret;
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED) {
+ stm32_port->txdone = false;
+ stm32_usart_tc_interrupt_disable(port);
+ stm32_usart_rs485_rts_enable(port);
+ }
+
if (port->x_char) {
if (stm32_port->tx_dma_busy)
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
@@ -596,8 +619,14 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit)) {
stm32_usart_tx_interrupt_disable(port);
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED) {
+ stm32_port->txdone = true;
+ stm32_usart_tc_interrupt_enable(port);
+ }
+ }
}
static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
@@ -610,6 +639,13 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
sr = readl_relaxed(port->membase + ofs->isr);
+ if (!stm32_port->hw_flow_control &&
+ port->rs485.flags & SER_RS485_ENABLED &&
+ (sr & USART_SR_TC)) {
+ stm32_usart_tc_interrupt_disable(port);
+ stm32_usart_rs485_rts_disable(port);
+ }
+
if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
writel_relaxed(USART_ICR_RTOCF,
port->membase + ofs->icr);
@@ -713,8 +749,10 @@ static void stm32_usart_start_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
- if (uart_circ_empty(xmit) && !port->x_char)
+ if (uart_circ_empty(xmit) && !port->x_char) {
+ stm32_usart_rs485_rts_disable(port);
return;
+ }
stm32_usart_rs485_rts_enable(port);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 53bcd032fce7..852573e1a690 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -268,6 +268,7 @@ struct stm32_port {
bool hw_flow_control;
bool swap; /* swap RX & TX pins */
bool fifoen;
+ bool txdone;
int rxftcfg; /* RX FIFO threshold CFG */
int txftcfg; /* TX FIFO threshold CFG */
bool wakeup_src;
