This is a note to let you know that I've just added the patch titled ARM: dts: kirkwood: lsxl: fix serial line to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-kirkwood-lsxl-fix-serial-line.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 4859586548aa8f917ab773a26069fe4416dfb4c6 Author: Michael Walle <michael@xxxxxxxx> Date: Tue Aug 16 02:10:24 2022 +0200 ARM: dts: kirkwood: lsxl: fix serial line [ Upstream commit 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ] Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") unknowingly broke the serial output on this board. Before this commit, the pinmux was still configured by the bootloader and the kernel didn't reconfigured it again. This was an oversight by the initial board support where the pinmux for the serial line was never configured by the kernel. But with this commit, the serial line will be reconfigured to the wrong pins. This is especially confusing, because the output still works, but the input doesn't. Presumingly, the input is reconfigured to MPP10, but the output is connected to both MPP11 and MPP5. Override the pinmux in the board device tree. Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") Signed-off-by: Michael Walle <michael@xxxxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..321a40a98ed2 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo";