This is a note to let you know that I've just added the patch titled phy: rockchip-inno-usb2: Return zero after otg sync to the 6.0-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: phy-rockchip-inno-usb2-return-zero-after-otg-sync.patch and it can be found in the queue-6.0 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 3330886c2775c9fe43a41bd793b4775bc5f4af81 Author: Peter Geis <pgwipeout@xxxxxxxxx> Date: Fri Sep 2 14:45:42 2022 -0400 phy: rockchip-inno-usb2: Return zero after otg sync [ Upstream commit f340ed8664a55a467850ec1689996e63d9ee971a ] The otg sync state patch reuses the ret variable, but fails to set it to zero after use. This leads to a situation when the otg port is in peripheral mode where the otg phy aborts halfway through setup. It also fails to account for a failure to register the extcon notifier. Fix this by using our own variable and skipping otg sync in case of failure. Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") Reported-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx> Reported-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx> Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx> Tested-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx> Tested-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx> Reviewed-by: Samuel Holland <samuel@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20220902184543.1234835-1-pgwipeout@xxxxxxxxx Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 0b1e9337ee8e..e6ededc51523 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, struct rockchip_usb2phy_port *rport, struct device_node *child_np) { - int ret; + int ret, id; rport->port_id = USB2PHY_PORT_OTG; rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; @@ -1162,13 +1162,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, ret = devm_extcon_register_notifier(rphy->dev, rphy->edev, EXTCON_USB_HOST, &rport->event_nb); - if (ret) + if (ret) { dev_err(rphy->dev, "register USB HOST notifier failed\n"); + goto out; + } if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { /* do initial sync of usb state */ - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); } }