This is a note to let you know that I've just added the patch titled
arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
to the 6.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-marvell-98dx25xx-use-correct-property-for-.patch
and it can be found in the queue-6.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5e0159fea3fca6f59377c13697b165ea83bc09c8
Author: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Date: Thu Sep 1 14:28:08 2022 +1200
arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
[ Upstream commit 2b14d382ec97ca5b420239ee6e16da390fab476c ]
Use the correct names for scl-gpios and sda-gpios so that the generic
i2c recovery code will find them. While we're here set the
GPIO_OPEN_DRAIN flag on the gpios.
Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board")
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 80b44c7df56a..881bf948d1df 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -117,8 +117,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c0_pins>;
pinctrl-1 = <&i2c0_gpio>;
- scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -136,8 +136,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c1_pins>;
pinctrl-1 = <&i2c1_gpio>;
- scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
