This is a note to let you know that I've just added the patch titled
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-rockchip-set-rk3399-gru-pclk_edp-to-24-mhz.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5aa4083bf445274a6da7ff70aceef94d954cb09a
Author: zain wang <wzz@xxxxxxxxxxxxxx>
Date: Tue Aug 30 13:16:17 2022 -0700
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
[ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ]
We've found the AUX channel to be less reliable with PCLK_EDP at a
higher rate (typically 25 MHz). This is especially important on systems
with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant
use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause
"problems between syncing the PHY an PCLK", which leads to all sorts of
unreliabilities around register operations.
Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook")
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 53185404d3c8..7416db3d27a7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -237,6 +237,14 @@ &cdn_dp {
&edp {
status = "okay";
+ /*
+ * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+ * set this here, because rk3399-gru.dtsi ensures we can generate this
+ * off GPLL=600MHz, whereas some other RK3399 boards may not.
+ */
+ assigned-clocks = <&cru PCLK_EDP>;
+ assigned-clock-rates = <24000000>;
+
ports {
edp_out: port@1 {
reg = <1>;
