This is a note to let you know that I've just added the patch titled gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx to the 4.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: gpio-mpc8xxx-fix-support-for-irq_type_level_low-flow.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 1ab1d96aead014336703902c9c5d3679da158592 Author: Pali Rohár <pali@xxxxxxxxxx> Date: Tue Sep 6 12:54:31 2022 +0200 gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx [ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ] Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Signed-off-by: Bartosz Golaszewski <brgl@xxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 1899d172590b..546f8c453add 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -168,6 +168,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type) { case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)