Patch "serial: fsl_lpuart: RS485 RTS polariy is inverse" has been added to the 4.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    serial: fsl_lpuart: RS485 RTS polariy is inverse

to the 4.19-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     serial-fsl_lpuart-rs485-rts-polariy-is-inverse.patch
and it can be found in the queue-4.19 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 846651eca073e2e02e37490a4a52752415d84781 Mon Sep 17 00:00:00 2001
From: Shenwei Wang <shenwei.wang@xxxxxxx>
Date: Fri, 5 Aug 2022 09:45:29 -0500
Subject: serial: fsl_lpuart: RS485 RTS polariy is inverse

From: Shenwei Wang <shenwei.wang@xxxxxxx>

commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Nicolas Diaz <nicolas.diaz@xxxxxxx>
Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/fsl_lpuart.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1102,9 +1102,9 @@ static int lpuart_config_rs485(struct ua
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	/* Store the new configuration */


Patches currently in stable-queue which might be from shenwei.wang@xxxxxxx are

queue-4.19/serial-fsl_lpuart-rs485-rts-polariy-is-inverse.patch



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux