Patch "ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter" has been added to the 5.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter

to the 5.19-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     ixgbe-stop-resetting-systime-in-ixgbe_ptp_start_cycl.patch
and it can be found in the queue-5.19 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit b5e01d178ca9c9db8e50c4ec44d995d35dc3f84f
Author: Jacob Keller <jacob.e.keller@xxxxxxxxx>
Date:   Mon Aug 1 17:24:19 2022 -0700

    ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
    
    [ Upstream commit 25d7a5f5a6bb15a2dae0a3f39ea5dda215024726 ]
    
    The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
    cyclecounter parameters need to be changed.
    
    Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x
    devices"), this function has cleared the SYSTIME registers and reset the
    TSAUXC DISABLE_SYSTIME bit.
    
    While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
    them during ixgbe_ptp_start_cyclecounter. This function may be called
    during both reset and link status change. When link changes, the SYSTIME
    counter is still operating normally, but the cyclecounter should be updated
    to account for the possibly changed parameters.
    
    Clearing SYSTIME when link changes causes the timecounter to jump because
    the cycle counter now reads zero.
    
    Extract the SYSTIME initialization out to a new function and call this
    during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
    an unnecessary reset of the current time.
    
    This also restores the original SYSTIME clearing that occurred during
    ixgbe_ptp_reset before the commit above.
    
    Reported-by: Steve Payne <spayne@xxxxxxxxxxx>
    Reported-by: Ilya Evenbach <ievenbach@xxxxxxxxxxx>
    Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices")
    Signed-off-by: Jacob Keller <jacob.e.keller@xxxxxxxxx>
    Tested-by: Gurucharan <gurucharanx.g@xxxxxxxxx> (A Contingent worker at Intel)
    Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 336426a67ac1b..38cda659f65f4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -1208,7 +1208,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	struct cyclecounter cc;
 	unsigned long flags;
 	u32 incval = 0;
-	u32 tsauxc = 0;
 	u32 fuse0 = 0;
 
 	/* For some of the boards below this mask is technically incorrect.
@@ -1243,18 +1242,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	case ixgbe_mac_x550em_a:
 	case ixgbe_mac_X550:
 		cc.read = ixgbe_ptp_read_X550;
-
-		/* enable SYSTIME counter */
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
-		tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
-		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
-				tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
-		IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
-		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
-
-		IXGBE_WRITE_FLUSH(hw);
 		break;
 	case ixgbe_mac_X540:
 		cc.read = ixgbe_ptp_read_82599;
@@ -1286,6 +1273,50 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 }
 
+/**
+ * ixgbe_ptp_init_systime - Initialize SYSTIME registers
+ * @adapter: the ixgbe private board structure
+ *
+ * Initialize and start the SYSTIME registers.
+ */
+static void ixgbe_ptp_init_systime(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 tsauxc;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_x550em_a:
+	case ixgbe_mac_X550:
+		tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
+
+		/* Reset SYSTIME registers to 0 */
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
+
+		/* Reset interrupt settings */
+		IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
+
+		/* Activate the SYSTIME counter */
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
+				tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_82599EB:
+		/* Reset SYSTIME registers to 0 */
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
+		break;
+	default:
+		/* Other devices aren't supported */
+		return;
+	};
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
 /**
  * ixgbe_ptp_reset
  * @adapter: the ixgbe private board structure
@@ -1312,6 +1343,8 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
 
 	ixgbe_ptp_start_cyclecounter(adapter);
 
+	ixgbe_ptp_init_systime(adapter);
+
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
 	timecounter_init(&adapter->hw_tc, &adapter->hw_cc,
 			 ktime_to_ns(ktime_get_real()));



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux