This is a note to let you know that I've just added the patch titled
clk: renesas: r9a06g032: Fix UART clkgrp bitsel
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
clk-renesas-r9a06g032-fix-uart-clkgrp-bitsel.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit ef8fe2d14c6412b1ded4a6e68428d622047c2598
Author: Ralph Siemsen <ralph.siemsen@xxxxxxxxxx>
Date: Wed May 18 14:25:27 2022 -0400
clk: renesas: r9a06g032: Fix UART clkgrp bitsel
[ Upstream commit 2dee50ab9e72a3cae75b65e5934c8dd3e9bf01bc ]
There are two UART clock groups, each having a mux to select its
upstream clock source. The register/bit definitions for accessing these
two muxes appear to have been reversed since introduction. Correct them
so as to match the hardware manual.
Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Ralph Siemsen <ralph.siemsen@xxxxxxxxxx>
Reviewed-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@xxxxxxxxxx
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index f2dc625b745d..80df4eb041cc 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -286,8 +286,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
.name = "uart_group_012",
.type = K_BITSEL,
.source = 1 + R9A06G032_DIV_UART,
- /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
- .dual.sel = ((0xec / 4) << 5) | 24,
+ /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
+ .dual.sel = ((0x34 / 4) << 5) | 30,
.dual.group = 0,
},
{
@@ -295,8 +295,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
.name = "uart_group_34567",
.type = K_BITSEL,
.source = 1 + R9A06G032_DIV_P2_PG,
- /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
- .dual.sel = ((0x34 / 4) << 5) | 30,
+ /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
+ .dual.sel = ((0xec / 4) << 5) | 24,
.dual.group = 1,
},
D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5),
