This is a note to let you know that I've just added the patch titled net: dsa: bcm_sf2: force pause link settings to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-dsa-bcm_sf2-force-pause-link-settings.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 7c97bc0128b2eecc703106112679a69d446d1a12 Mon Sep 17 00:00:00 2001 From: Doug Berger <opendmb@xxxxxxxxx> Date: Wed, 22 Jun 2022 20:02:04 -0700 Subject: net: dsa: bcm_sf2: force pause link settings From: Doug Berger <opendmb@xxxxxxxxx> commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream. The pause settings reported by the PHY should also be applied to the GMII port status override otherwise the switch will not generate pause frames towards the link partner despite the advertisement saying otherwise. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Doug Berger <opendmb@xxxxxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@xxxxxxxxx Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/dsa/bcm_sf2.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -600,7 +600,9 @@ static void bcm_sf2_sw_adjust_link(struc struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); struct ethtool_eee *p = &priv->port_sts[port].eee; u32 id_mode_dis = 0, port_mode; + u16 lcl_adv = 0, rmt_adv = 0; const char *str = NULL; + u8 flowctrl = 0; u32 reg; switch (phydev->interface) { @@ -667,10 +669,27 @@ force_link: break; } + if (phydev->duplex == DUPLEX_FULL && + phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + if (phydev->advertising & ADVERTISED_Pause) + lcl_adv = ADVERTISE_PAUSE_CAP; + if (phydev->advertising & ADVERTISED_Asym_Pause) + lcl_adv |= ADVERTISE_PAUSE_ASYM; + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + } + if (phydev->link) reg |= LINK_STS; if (phydev->duplex == DUPLEX_FULL) reg |= DUPLX_MODE; + if (flowctrl & FLOW_CTRL_TX) + reg |= TXFLOW_CNTL; + if (flowctrl & FLOW_CTRL_RX) + reg |= RXFLOW_CNTL; core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); Patches currently in stable-queue which might be from opendmb@xxxxxxxxx are queue-4.9/net-dsa-bcm_sf2-force-pause-link-settings.patch