This is a note to let you know that I've just added the patch titled arm64: dts: imx8mp-evk: correct vbus pad settings to the 5.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-imx8mp-evk-correct-vbus-pad-settings.patch and it can be found in the queue-5.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit bc1a4b109a688ddb3b0e7e9e313552fdfda6dc5d Author: Peng Fan <peng.fan@xxxxxxx> Date: Wed Jun 22 14:14:00 2022 +0800 arm64: dts: imx8mp-evk: correct vbus pad settings [ Upstream commit e2c00820a99c55c9bb40642d5818a904a1e0d664 ] 0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 43da4f92a611 ("arm64: dts: imx8mp-evk: enable usb1 as host mode") Signed-off-by: Peng Fan <peng.fan@xxxxxxx> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 4ff75c4cbddc..a28ce8af61bd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -513,7 +513,7 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 pinctrl_usb1_vbus: usb1grp { fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19 + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 >; };