Patch "ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect" has been added to the 5.18-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect

to the 5.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     asoc-codecs-rt700-rt711-rt711-sdca-resume-bus-codec-.patch
and it can be found in the queue-5.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 8d78041074a715cef6e1e2a6f27c7c402b6778aa
Author: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Date:   Mon Jun 6 15:37:52 2022 -0500

    ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect
    
    [ Upstream commit 40737057b48f1b4db67b0d766b95c87ba8fc5e03 ]
    
    The .set_jack_detect() codec component callback is invoked during card
    registration, which happens when the machine driver is probed.
    
    The issue is that this callback can race with the bus suspend/resume,
    and IO timeouts can happen. This can be reproduced very easily if the
    machine driver is 'blacklisted' and manually probed after the bus
    suspends. The bus and codec need to be re-initialized using pm_runtime
    helpers.
    
    Previous contributions tried to make sure accesses to the bus during
    the .set_jack_detect() component callback only happen when the bus is
    active. This was done by changing the regcache status on a component
    remove. This is however a layering violation, the regcache status
    should only be modified on device probe, suspend and resume. The
    component probe/remove should not modify how the device regcache is
    handled. This solution also didn't handle all the possible race
    conditions, and the RT700 headset codec was not handled.
    
    This patch tries to resume the codec device before handling the jack
    initializations. In case the codec has not yet been initialized,
    pm_runtime may not be enabled yet, so we don't squelch the -EACCES
    error code and only stop the jack information. When the codec reports
    as attached, the jack initialization will proceed as usual.
    
    BugLink: https://github.com/thesofproject/linux/issues/3643
    Fixes: 7ad4d237e7c4a ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
    Fixes: 899b12542b089 ('ASoC: rt711: add snd_soc_component remove callback')
    Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
    Reviewed-by: Rander Wang <rander.wang@xxxxxxxxx>
    Reviewed-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
    Link: https://lore.kernel.org/r/20220606203752.144159-8-pierre-louis.bossart@xxxxxxxxxxxxxxx
    Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/sound/soc/codecs/rt700.c b/sound/soc/codecs/rt700.c
index e61a8257bf64..360d61a36c35 100644
--- a/sound/soc/codecs/rt700.c
+++ b/sound/soc/codecs/rt700.c
@@ -315,17 +315,27 @@ static int rt700_set_jack_detect(struct snd_soc_component *component,
 	struct snd_soc_jack *hs_jack, void *data)
 {
 	struct rt700_priv *rt700 = snd_soc_component_get_drvdata(component);
+	int ret;
 
 	rt700->hs_jack = hs_jack;
 
-	if (!rt700->hw_init) {
-		dev_dbg(&rt700->slave->dev,
-			"%s hw_init not ready yet\n", __func__);
+	ret = pm_runtime_resume_and_get(component->dev);
+	if (ret < 0) {
+		if (ret != -EACCES) {
+			dev_err(component->dev, "%s: failed to resume %d\n", __func__, ret);
+			return ret;
+		}
+
+		/* pm_runtime not enabled yet */
+		dev_dbg(component->dev,	"%s: skipping jack init for now\n", __func__);
 		return 0;
 	}
 
 	rt700_jack_init(rt700);
 
+	pm_runtime_mark_last_busy(component->dev);
+	pm_runtime_put_autosuspend(component->dev);
+
 	return 0;
 }
 
diff --git a/sound/soc/codecs/rt711-sdca.c b/sound/soc/codecs/rt711-sdca.c
index 57629c18db38..9d59e653b941 100644
--- a/sound/soc/codecs/rt711-sdca.c
+++ b/sound/soc/codecs/rt711-sdca.c
@@ -487,16 +487,27 @@ static int rt711_sdca_set_jack_detect(struct snd_soc_component *component,
 	struct snd_soc_jack *hs_jack, void *data)
 {
 	struct rt711_sdca_priv *rt711 = snd_soc_component_get_drvdata(component);
+	int ret;
 
 	rt711->hs_jack = hs_jack;
 
-	if (!rt711->hw_init) {
-		dev_dbg(&rt711->slave->dev,
-			"%s hw_init not ready yet\n", __func__);
+	ret = pm_runtime_resume_and_get(component->dev);
+	if (ret < 0) {
+		if (ret != -EACCES) {
+			dev_err(component->dev, "%s: failed to resume %d\n", __func__, ret);
+			return ret;
+		}
+
+		/* pm_runtime not enabled yet */
+		dev_dbg(component->dev,	"%s: skipping jack init for now\n", __func__);
 		return 0;
 	}
 
 	rt711_sdca_jack_init(rt711);
+
+	pm_runtime_mark_last_busy(component->dev);
+	pm_runtime_put_autosuspend(component->dev);
+
 	return 0;
 }
 
@@ -1190,14 +1201,6 @@ static int rt711_sdca_probe(struct snd_soc_component *component)
 	return 0;
 }
 
-static void rt711_sdca_remove(struct snd_soc_component *component)
-{
-	struct rt711_sdca_priv *rt711 = snd_soc_component_get_drvdata(component);
-
-	regcache_cache_only(rt711->regmap, true);
-	regcache_cache_only(rt711->mbq_regmap, true);
-}
-
 static const struct snd_soc_component_driver soc_sdca_dev_rt711 = {
 	.probe = rt711_sdca_probe,
 	.controls = rt711_sdca_snd_controls,
@@ -1207,7 +1210,6 @@ static const struct snd_soc_component_driver soc_sdca_dev_rt711 = {
 	.dapm_routes = rt711_sdca_audio_map,
 	.num_dapm_routes = ARRAY_SIZE(rt711_sdca_audio_map),
 	.set_jack = rt711_sdca_set_jack_detect,
-	.remove = rt711_sdca_remove,
 	.endianness = 1,
 };
 
diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c
index 9838fb4d5b9c..9958067e80f1 100644
--- a/sound/soc/codecs/rt711.c
+++ b/sound/soc/codecs/rt711.c
@@ -457,17 +457,27 @@ static int rt711_set_jack_detect(struct snd_soc_component *component,
 	struct snd_soc_jack *hs_jack, void *data)
 {
 	struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component);
+	int ret;
 
 	rt711->hs_jack = hs_jack;
 
-	if (!rt711->hw_init) {
-		dev_dbg(&rt711->slave->dev,
-			"%s hw_init not ready yet\n", __func__);
+	ret = pm_runtime_resume_and_get(component->dev);
+	if (ret < 0) {
+		if (ret != -EACCES) {
+			dev_err(component->dev, "%s: failed to resume %d\n", __func__, ret);
+			return ret;
+		}
+
+		/* pm_runtime not enabled yet */
+		dev_dbg(component->dev,	"%s: skipping jack init for now\n", __func__);
 		return 0;
 	}
 
 	rt711_jack_init(rt711);
 
+	pm_runtime_mark_last_busy(component->dev);
+	pm_runtime_put_autosuspend(component->dev);
+
 	return 0;
 }
 
@@ -932,13 +942,6 @@ static int rt711_probe(struct snd_soc_component *component)
 	return 0;
 }
 
-static void rt711_remove(struct snd_soc_component *component)
-{
-	struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component);
-
-	regcache_cache_only(rt711->regmap, true);
-}
-
 static const struct snd_soc_component_driver soc_codec_dev_rt711 = {
 	.probe = rt711_probe,
 	.set_bias_level = rt711_set_bias_level,
@@ -949,7 +952,6 @@ static const struct snd_soc_component_driver soc_codec_dev_rt711 = {
 	.dapm_routes = rt711_audio_map,
 	.num_dapm_routes = ARRAY_SIZE(rt711_audio_map),
 	.set_jack = rt711_set_jack_detect,
-	.remove = rt711_remove,
 	.endianness = 1,
 };
 



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux