This is a note to let you know that I've just added the patch titled
mmc: mediatek: wait dma stop bit reset to 0
to the 5.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-mediatek-wait-dma-stop-bit-reset-to-0.patch
and it can be found in the queue-5.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 89bcd9a64b849380ef57e3032b307574e48db524 Mon Sep 17 00:00:00 2001
From: Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx>
Date: Thu, 9 Jun 2022 19:22:39 +0800
Subject: mmc: mediatek: wait dma stop bit reset to 0
From: Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx>
commit 89bcd9a64b849380ef57e3032b307574e48db524 upstream.
MediaTek IP requires that after dma stop, it need to wait this dma stop
bit auto-reset to 0. When bus is in high loading state, it will take a
while for the dma stop complete. If there is no waiting operation here,
when program runs to clear fifo and reset, bus will hang.
In addition, there should be no return in msdc_data_xfer_next() if
there is data need be transferred, because no matter what error occurs
here, it should continue to excute to the following mmc_request_done.
Otherwise the core layer may wait complete forever.
Signed-off-by: Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20220609112239.18911-1-mengqi.zhang@xxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/mtk-sd.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1356,7 +1356,7 @@ static void msdc_data_xfer_next(struct m
msdc_request_done(host, mrq);
}
-static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
+static void msdc_data_xfer_done(struct msdc_host *host, u32 events,
struct mmc_request *mrq, struct mmc_data *data)
{
struct mmc_command *stop;
@@ -1376,7 +1376,7 @@ static bool msdc_data_xfer_done(struct m
spin_unlock_irqrestore(&host->lock, flags);
if (done)
- return true;
+ return;
stop = data->stop;
if (check_data || (stop && stop->error)) {
@@ -1385,12 +1385,15 @@ static bool msdc_data_xfer_done(struct m
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
1);
+ ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CTRL, val,
+ !(val & MSDC_DMA_CTRL_STOP), 1, 20000);
+ if (ret)
+ dev_dbg(host->dev, "DMA stop timed out\n");
+
ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val,
!(val & MSDC_DMA_CFG_STS), 1, 20000);
- if (ret) {
- dev_dbg(host->dev, "DMA stop timed out\n");
- return false;
- }
+ if (ret)
+ dev_dbg(host->dev, "DMA inactive timed out\n");
sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
dev_dbg(host->dev, "DMA stop\n");
@@ -1415,9 +1418,7 @@ static bool msdc_data_xfer_done(struct m
}
msdc_data_xfer_next(host, mrq);
- done = true;
}
- return done;
}
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
@@ -2416,6 +2417,9 @@ static void msdc_cqe_disable(struct mmc_
if (recovery) {
sdr_set_field(host->base + MSDC_DMA_CTRL,
MSDC_DMA_CTRL_STOP, 1);
+ if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CTRL, val,
+ !(val & MSDC_DMA_CTRL_STOP), 1, 3000)))
+ return;
if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CFG, val,
!(val & MSDC_DMA_CFG_STS), 1, 3000)))
return;
Patches currently in stable-queue which might be from mengqi.zhang@xxxxxxxxxxxx are
queue-5.18/mmc-mediatek-wait-dma-stop-bit-reset-to-0.patch
