This is a note to let you know that I've just added the patch titled
dt-bindings: gpio: altera: correct interrupt-cells
to the 4.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
dt-bindings-gpio-altera-correct-interrupt-cells.patch
and it can be found in the queue-4.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 3a21c3ac93aff7b4522b152399df8f6a041df56d Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Date: Wed, 11 May 2022 12:54:46 -0500
Subject: dt-bindings: gpio: altera: correct interrupt-cells
From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
commit 3a21c3ac93aff7b4522b152399df8f6a041df56d upstream.
update documentation to correctly state the interrupt-cells to be 2.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 4fd9bbc6e071 ("drivers/gpio: Altera soft IP GPIO driver devicetree binding")
Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/gpio/gpio-altera.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
- The second cell is reserved and is currently unused.
- gpio-controller : Marks the device node as a GPIO controller.
- interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
- The first cell is the GPIO offset number within the GPIO controller.
+ - The second cell is the interrupt trigger type and level flags.
- interrupts: Specify the interrupt.
- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
#gpio-cells = <2>;
gpio-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
interrupt-controller;
};
Patches currently in stable-queue which might be from dinguyen@xxxxxxxxxx are
queue-4.19/dt-bindings-gpio-altera-correct-interrupt-cells.patch
