Patch "ARM: dts: BCM5301X: update CRU block description" has been added to the 5.15-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    ARM: dts: BCM5301X: update CRU block description

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-bcm5301x-update-cru-block-description.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 934a3168f3cb791c2a1e3ae68d8e593999f0ff66
Author: Rafał Miłecki <rafal@xxxxxxxxxx>
Date:   Fri Oct 29 18:05:23 2021 +0200

    ARM: dts: BCM5301X: update CRU block description
    
    [ Upstream commit 31fd9b79dc580301c53a001482755ba7e88c2809 ]
    
    This describes CRU in a way matching documentation and fixes:
    
    arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
            From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
    
    Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
    Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f69d2af3c1fa..db8c3f684786 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -423,14 +423,14 @@ dmu-bus@1800c000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -439,7 +439,7 @@ lcpll0: lcpll0@100 {
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -450,6 +450,11 @@ genpll: genpll@140 {
 						     "sata1", "sata2";
 			};
 
+			syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
 			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;