This is a note to let you know that I've just added the patch titled USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: usb-serial-cp210x-add-pids-for-kamstrup-usb-meter-reader.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 35a923a0b329c343e9e81d79518e2937eba06fcd Mon Sep 17 00:00:00 2001 From: Bruno Thomsen <bruno.thomsen@xxxxxxxxx> Date: Thu, 14 Apr 2022 10:12:02 +0200 Subject: USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader From: Bruno Thomsen <bruno.thomsen@xxxxxxxxx> commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream. Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1. The two different product IDs allow detection of dongle antenna solution: - Internal antenna - External antenna using SMA connector https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader Signed-off-by: Bruno Thomsen <bruno.thomsen@xxxxxxxxx> Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@xxxxxxxxx Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -192,6 +192,8 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */ + { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ Patches currently in stable-queue which might be from bruno.thomsen@xxxxxxxxx are queue-4.9/usb-serial-cp210x-add-pids-for-kamstrup-usb-meter-reader.patch