From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> commit 03e59b1e2f56245163b14c69e0a830c24b1a3a47 upstream. When HS400 tuning is complete and HS400 is going to be activated, we have to keep the current number of TAPs and should not overwrite them with a hardcoded value. This was probably a copy&paste mistake when upporting HS400 support from the BSP. Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@xxxxxxxxxxxxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/renesas_sdhi_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -302,10 +302,10 @@ static void renesas_sdhi_hs400_complete( SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) | sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2)); - /* Set the sampling clock selection range of HS400 mode */ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | - 0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); + sd_scc_read32(host, priv, + SH_MOBILE_SDHI_SCC_DTCNTL)); if (host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400) Patches currently in stable-queue which might be from wsa+renesas@xxxxxxxxxxxxxxxxxxxx are queue-4.19/mmc-renesas_sdhi-don-t-overwrite-tap-settings-when-hs400-tuning-is-complete.patch