This is a note to let you know that I've just added the patch titled
vxcan: enable local echo for sent CAN frames
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
vxcan-enable-local-echo-for-sent-can-frames.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit e3f23334ddffed3056e0b338bedffb411fa7f5bc
Author: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Date: Wed Mar 9 13:04:16 2022 +0100
vxcan: enable local echo for sent CAN frames
[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]
The vxcan driver provides a pair of virtual CAN interfaces to exchange
CAN traffic between different namespaces - analogue to veth.
In opposite to the vcan driver the local sent CAN traffic on this interface
is not echo'ed back but only sent to the remote peer. This is unusual and
can be easily fixed by removing IFF_ECHO from the netdevice flags that
are set for vxcan interfaces by default at startup.
Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed
in af_can.c in can_send(). This patch makes vxcan interfaces adopt the
same local echo behavior and procedures as known from the vcan interfaces.
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/all/20220309120416.83514-5-socketcan@xxxxxxxxxxxx
Signed-off-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
index 8861a7d875e7..be5566168d0f 100644
--- a/drivers/net/can/vxcan.c
+++ b/drivers/net/can/vxcan.c
@@ -148,7 +148,7 @@ static void vxcan_setup(struct net_device *dev)
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 0;
- dev->flags = (IFF_NOARP|IFF_ECHO);
+ dev->flags = IFF_NOARP;
dev->netdev_ops = &vxcan_netdev_ops;
dev->needs_free_netdev = true;
