Patch "media: mexon-ge2d: fixup frames size in registers" has been added to the 5.17-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    media: mexon-ge2d: fixup frames size in registers

to the 5.17-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     media-mexon-ge2d-fixup-frames-size-in-registers.patch
and it can be found in the queue-5.17 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit a954b410643cb3d777deca0853304eebfcb569f4
Author: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Date:   Thu Jun 3 10:42:15 2021 +0200

    media: mexon-ge2d: fixup frames size in registers
    
    [ Upstream commit 79e8c421a099bfbcebe59740153e55aa0442ced6 ]
    
    The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
    starting from 0. Thus the end should be the width/height minus 1.
    
    It can be an issue with clipping and rotation, where it will add spurious
    lines from uninitialized or unwanted data with a shift in the result.
    
    Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
    Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
    Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
    Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/media/platform/meson/ge2d/ge2d.c b/drivers/media/platform/meson/ge2d/ge2d.c
index ccda18e5a377..5e7b319f300d 100644
--- a/drivers/media/platform/meson/ge2d/ge2d.c
+++ b/drivers/media/platform/meson/ge2d/ge2d.c
@@ -215,35 +215,35 @@ static void ge2d_hw_start(struct meson_ge2d *ge2d)
 
 	regmap_write(ge2d->map, GE2D_SRC1_CLIPY_START_END,
 		     FIELD_PREP(GE2D_START, ctx->in.crop.top) |
-		     FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height));
+		     FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height - 1));
 	regmap_write(ge2d->map, GE2D_SRC1_CLIPX_START_END,
 		     FIELD_PREP(GE2D_START, ctx->in.crop.left) |
-		     FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width));
+		     FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width - 1));
 	regmap_write(ge2d->map, GE2D_SRC2_CLIPY_START_END,
 		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
-		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height - 1));
 	regmap_write(ge2d->map, GE2D_SRC2_CLIPX_START_END,
 		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
-		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width - 1));
 	regmap_write(ge2d->map, GE2D_DST_CLIPY_START_END,
 		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
-		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height - 1));
 	regmap_write(ge2d->map, GE2D_DST_CLIPX_START_END,
 		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
-		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width - 1));
 
 	regmap_write(ge2d->map, GE2D_SRC1_Y_START_END,
-		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height));
+		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height - 1));
 	regmap_write(ge2d->map, GE2D_SRC1_X_START_END,
-		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width));
+		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width - 1));
 	regmap_write(ge2d->map, GE2D_SRC2_Y_START_END,
-		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height - 1));
 	regmap_write(ge2d->map, GE2D_SRC2_X_START_END,
-		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width - 1));
 	regmap_write(ge2d->map, GE2D_DST_Y_START_END,
-		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height - 1));
 	regmap_write(ge2d->map, GE2D_DST_X_START_END,
-		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width - 1));
 
 	/* Color, no blend, use source color */
 	reg = GE2D_ALU_DO_COLOR_OPERATION_LOGIC(LOGIC_OPERATION_COPY,



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux