This is a note to let you know that I've just added the patch titled net: phy: meson-gxl: fix interrupt handling in forced mode to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-phy-meson-gxl-fix-interrupt-handling-in-forced-m.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 46bd7730b89d30f1a048808a5a963ddded862ea6 Author: Heiner Kallweit <hkallweit1@xxxxxxxxx> Date: Thu Mar 3 08:54:15 2022 +0100 net: phy: meson-gxl: fix interrupt handling in forced mode [ Upstream commit a502a8f04097e038c3daa16c5202a9538116d563 ] This PHY doesn't support a link-up interrupt source. If aneg is enabled we use the "aneg complete" interrupt for this purpose, but if aneg is disabled link-up isn't signaled currently. According to a vendor driver there's an additional "energy detect" interrupt source that can be used to signal link-up if aneg is disabled. We can safely ignore this interrupt source if aneg is enabled. This patch was tested on a TX3 Mini TV box with S905W (even though boot message says it's a S905D). This issue has been existing longer, but due to changes in phylib and the driver the patch applies only from the commit marked as fixed. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@xxxxxxxxx Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 7e7904fee1d9..c49062ad72c6 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -30,8 +30,12 @@ #define INTSRC_LINK_DOWN BIT(4) #define INTSRC_REMOTE_FAULT BIT(5) #define INTSRC_ANEG_COMPLETE BIT(6) +#define INTSRC_ENERGY_DETECT BIT(7) #define INTSRC_MASK 30 +#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \ + INTSRC_ENERGY_DETECT) + #define BANK_ANALOG_DSP 0 #define BANK_WOL 1 #define BANK_BIST 3 @@ -200,7 +204,6 @@ static int meson_gxl_ack_interrupt(struct phy_device *phydev) static int meson_gxl_config_intr(struct phy_device *phydev) { - u16 val; int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { @@ -209,16 +212,9 @@ static int meson_gxl_config_intr(struct phy_device *phydev) if (ret) return ret; - val = INTSRC_ANEG_PR - | INTSRC_PARALLEL_FAULT - | INTSRC_ANEG_LP_ACK - | INTSRC_LINK_DOWN - | INTSRC_REMOTE_FAULT - | INTSRC_ANEG_COMPLETE; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES); } else { - val = 0; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, 0); /* Ack any pending IRQ */ ret = meson_gxl_ack_interrupt(phydev); @@ -237,9 +233,16 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) return IRQ_NONE; } + irq_status &= INT_SOURCES; + if (irq_status == 0) return IRQ_NONE; + /* Aneg-complete interrupt is used for link-up detection */ + if (phydev->autoneg == AUTONEG_ENABLE && + irq_status == INTSRC_ENERGY_DETECT) + return IRQ_HANDLED; + phy_trigger_machine(phydev); return IRQ_HANDLED;