From: Hans de Goede <hdegoede@xxxxxxxxxx> commit 62e3f0afe246720f7646eb1b034a6897dac34405 upstream. When the Bay Trail phy GPIO mappings where added cs and reset were swapped, this did not cause any issues sofar, because sofar they were always driven high/low at the same time. Note the new mapping has been verified both in /sys/kernel/debug/gpio output on Android factory images on multiple devices, as well as in the schematics for some devices. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <stable@xxxxxxxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/dwc3/dwc3-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -76,8 +76,8 @@ static const struct acpi_gpio_mapping ac static struct gpiod_lookup_table platform_bytcr_gpios = { .dev_id = "0000:00:16.0", .table = { - GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH), {} }, }; Patches currently in stable-queue which might be from hdegoede@xxxxxxxxxx are queue-4.19/usb-dwc3-pci-fix-bay-trail-phy-gpio-mappings.patch