Patch "net: dsa: lantiq_gswip: don't use devres for mdiobus" has been added to the 5.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    net: dsa: lantiq_gswip: don't use devres for mdiobus

to the 5.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-dsa-lantiq_gswip-don-t-use-devres-for-mdiobus.patch
and it can be found in the queue-5.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit ff7d61921056d830808385a8fe181038439b984e
Author: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Date:   Mon Feb 7 18:15:53 2022 +0200

    net: dsa: lantiq_gswip: don't use devres for mdiobus
    
    [ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]
    
    As explained in commits:
    74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
    5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
    
    mdiobus_free() will panic when called from devm_mdiobus_free() <-
    devres_release_all() <- __device_release_driver(), and that mdiobus was
    not previously unregistered.
    
    The GSWIP switch is a platform device, so the initial set of constraints
    that I thought would cause this (I2C or SPI buses which call ->remove on
    ->shutdown) do not apply. But there is one more which applies here.
    
    If the DSA master itself is on a bus that calls ->remove from ->shutdown
    (like dpaa2-eth, which is on the fsl-mc bus), there is a device link
    between the switch and the DSA master, and device_links_unbind_consumers()
    will unbind the GSWIP switch driver on shutdown.
    
    So the same treatment must be applied to all DSA switch drivers, which
    is: either use devres for both the mdiobus allocation and registration,
    or don't use devres at all.
    
    The gswip driver has the code structure in place for orderly mdiobus
    removal, so just replace devm_mdiobus_alloc() with the non-devres
    variant, and add manual free where necessary, to ensure that we don't
    let devres free a still-registered bus.
    
    Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
    Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
    Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
    Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 4d23a7aba7961..ed517985ca88e 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -495,8 +495,9 @@ static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
 static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 {
 	struct dsa_switch *ds = priv->ds;
+	int err;
 
-	ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+	ds->slave_mii_bus = mdiobus_alloc();
 	if (!ds->slave_mii_bus)
 		return -ENOMEM;
 
@@ -509,7 +510,11 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 	ds->slave_mii_bus->parent = priv->dev;
 	ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
 
-	return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	if (err)
+		mdiobus_free(ds->slave_mii_bus);
+
+	return err;
 }
 
 static int gswip_pce_table_entry_read(struct gswip_priv *priv,
@@ -2086,8 +2091,10 @@ static int gswip_probe(struct platform_device *pdev)
 	gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
 	dsa_unregister_switch(priv->ds);
 mdio_bus:
-	if (mdio_np)
+	if (mdio_np) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
+	}
 put_mdio_node:
 	of_node_put(mdio_np);
 	for (i = 0; i < priv->num_gphy_fw; i++)
@@ -2107,6 +2114,7 @@ static int gswip_remove(struct platform_device *pdev)
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
 	}
 



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux