From: Helge Deller <deller@xxxxxx> commit 1148836fd3226c20de841084aba24184d4fbbe77 upstream. This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@xxxxxx> Acked-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Acked-by: Sven Schnelle <svens@xxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx # v5.16+ Signed-off-by: Helge Deller <deller@xxxxxx> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@xxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- Documentation/gpu/todo.rst | 13 drivers/video/fbdev/core/bitblit.c | 16 + drivers/video/fbdev/core/fbcon.c | 509 ++++++++++++++++++++++++++++++-- drivers/video/fbdev/core/fbcon.h | 59 +++ drivers/video/fbdev/core/fbcon_ccw.c | 28 + drivers/video/fbdev/core/fbcon_cw.c | 28 + drivers/video/fbdev/core/fbcon_rotate.h | 9 drivers/video/fbdev/core/fbcon_ud.c | 37 +- drivers/video/fbdev/core/tileblit.c | 16 + drivers/video/fbdev/skeletonfb.c | 12 include/linux/fb.h | 2 11 files changed, 678 insertions(+), 51 deletions(-) --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -314,19 +314,16 @@ Level: Advanced Garbage collect fbdev scrolling acceleration -------------------------------------------- -Scroll acceleration has been disabled in fbcon. Now it works as the old -SCROLL_REDRAW mode. A ton of code was removed in fbcon.c and the hook bmove was -removed from fbcon_ops. -Remaining tasks: +Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode = +SCROLL_REDRAW. There's a ton of code this will allow us to remove: -- a bunch of the hooks in fbcon_ops could be removed or simplified by calling +- lots of code in fbcon.c + +- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called directly instead of the function table (with a switch on p->rotate) - fb_copyarea is unused after this, and can be deleted from all drivers -- after that, fb_copyarea can be deleted from fb_ops in include/linux/fb.h as - well as cfb_copyarea - Note that not all acceleration code can be deleted, since clearing and cursor support is still accelerated, which might be good candidates for further deletion projects. --- a/drivers/video/fbdev/core/bitblit.c +++ b/drivers/video/fbdev/core/bitblit.c @@ -43,6 +43,21 @@ static void update_attr(u8 *dst, u8 *src } } +static void bit_bmove(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width) +{ + struct fb_copyarea area; + + area.sx = sx * vc->vc_font.width; + area.sy = sy * vc->vc_font.height; + area.dx = dx * vc->vc_font.width; + area.dy = dy * vc->vc_font.height; + area.height = height * vc->vc_font.height; + area.width = width * vc->vc_font.width; + + info->fbops->fb_copyarea(info, &area); +} + static void bit_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { @@ -378,6 +393,7 @@ static int bit_update_start(struct fb_in void fbcon_set_bitops(struct fbcon_ops *ops) { + ops->bmove = bit_bmove; ops->clear = bit_clear; ops->putcs = bit_putcs; ops->clear_margins = bit_clear_margins; --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -173,6 +173,8 @@ static void fbcon_putcs(struct vc_data * int count, int ypos, int xpos); static void fbcon_clear_margins(struct vc_data *vc, int bottom_only); static void fbcon_cursor(struct vc_data *vc, int mode); +static void fbcon_bmove(struct vc_data *vc, int sy, int sx, int dy, int dx, + int height, int width); static int fbcon_switch(struct vc_data *vc); static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch); static void fbcon_set_palette(struct vc_data *vc, const unsigned char *table); @@ -180,8 +182,16 @@ static void fbcon_set_palette(struct vc_ /* * Internal routines */ +static __inline__ void ywrap_up(struct vc_data *vc, int count); +static __inline__ void ywrap_down(struct vc_data *vc, int count); +static __inline__ void ypan_up(struct vc_data *vc, int count); +static __inline__ void ypan_down(struct vc_data *vc, int count); +static void fbcon_bmove_rec(struct vc_data *vc, struct fbcon_display *p, int sy, int sx, + int dy, int dx, int height, int width, u_int y_break); static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var, int unit); +static void fbcon_redraw_move(struct vc_data *vc, struct fbcon_display *p, + int line, int count, int dy); static void fbcon_modechanged(struct fb_info *info); static void fbcon_set_all_vcs(struct fb_info *info); static void fbcon_start(void); @@ -1126,6 +1136,14 @@ static void fbcon_init(struct vc_data *v ops->graphics = 0; /* + * No more hw acceleration for fbcon. + * + * FIXME: Garbage collect all the now dead code after sufficient time + * has passed. + */ + p->scrollmode = SCROLL_REDRAW; + + /* * ++guenther: console.c:vc_allocate() relies on initializing * vc_{cols,rows}, but we must not set those if we are only * resizing the console. @@ -1211,13 +1229,14 @@ finished: * This system is now divided into two levels because of complications * caused by hardware scrolling. Top level functions: * - * fbcon_clear(), fbcon_putc(), fbcon_clear_margins() + * fbcon_bmove(), fbcon_clear(), fbcon_putc(), fbcon_clear_margins() * * handles y values in range [0, scr_height-1] that correspond to real * screen positions. y_wrap shift means that first line of bitmap may be * anywhere on this display. These functions convert lineoffsets to * bitmap offsets and deal with the wrap-around case by splitting blits. * + * fbcon_bmove_physical_8() -- These functions fast implementations * fbcon_clear_physical_8() -- of original fbcon_XXX fns. * fbcon_putc_physical_8() -- (font width != 8) may be added later * @@ -1390,6 +1409,224 @@ static void fbcon_set_disp(struct fb_inf } } +static __inline__ void ywrap_up(struct vc_data *vc, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_ops *ops = info->fbcon_par; + struct fbcon_display *p = &fb_display[vc->vc_num]; + + p->yscroll += count; + if (p->yscroll >= p->vrows) /* Deal with wrap */ + p->yscroll -= p->vrows; + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode |= FB_VMODE_YWRAP; + ops->update_start(info); + scrollback_max += count; + if (scrollback_max > scrollback_phys_max) + scrollback_max = scrollback_phys_max; + scrollback_current = 0; +} + +static __inline__ void ywrap_down(struct vc_data *vc, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_ops *ops = info->fbcon_par; + struct fbcon_display *p = &fb_display[vc->vc_num]; + + p->yscroll -= count; + if (p->yscroll < 0) /* Deal with wrap */ + p->yscroll += p->vrows; + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode |= FB_VMODE_YWRAP; + ops->update_start(info); + scrollback_max -= count; + if (scrollback_max < 0) + scrollback_max = 0; + scrollback_current = 0; +} + +static __inline__ void ypan_up(struct vc_data *vc, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; + + p->yscroll += count; + if (p->yscroll > p->vrows - vc->vc_rows) { + ops->bmove(vc, info, p->vrows - vc->vc_rows, + 0, 0, 0, vc->vc_rows, vc->vc_cols); + p->yscroll -= p->vrows - vc->vc_rows; + } + + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode &= ~FB_VMODE_YWRAP; + ops->update_start(info); + fbcon_clear_margins(vc, 1); + scrollback_max += count; + if (scrollback_max > scrollback_phys_max) + scrollback_max = scrollback_phys_max; + scrollback_current = 0; +} + +static __inline__ void ypan_up_redraw(struct vc_data *vc, int t, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_ops *ops = info->fbcon_par; + struct fbcon_display *p = &fb_display[vc->vc_num]; + + p->yscroll += count; + + if (p->yscroll > p->vrows - vc->vc_rows) { + p->yscroll -= p->vrows - vc->vc_rows; + fbcon_redraw_move(vc, p, t + count, vc->vc_rows - count, t); + } + + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode &= ~FB_VMODE_YWRAP; + ops->update_start(info); + fbcon_clear_margins(vc, 1); + scrollback_max += count; + if (scrollback_max > scrollback_phys_max) + scrollback_max = scrollback_phys_max; + scrollback_current = 0; +} + +static __inline__ void ypan_down(struct vc_data *vc, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; + + p->yscroll -= count; + if (p->yscroll < 0) { + ops->bmove(vc, info, 0, 0, p->vrows - vc->vc_rows, + 0, vc->vc_rows, vc->vc_cols); + p->yscroll += p->vrows - vc->vc_rows; + } + + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode &= ~FB_VMODE_YWRAP; + ops->update_start(info); + fbcon_clear_margins(vc, 1); + scrollback_max -= count; + if (scrollback_max < 0) + scrollback_max = 0; + scrollback_current = 0; +} + +static __inline__ void ypan_down_redraw(struct vc_data *vc, int t, int count) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_ops *ops = info->fbcon_par; + struct fbcon_display *p = &fb_display[vc->vc_num]; + + p->yscroll -= count; + + if (p->yscroll < 0) { + p->yscroll += p->vrows - vc->vc_rows; + fbcon_redraw_move(vc, p, t, vc->vc_rows - count, t + count); + } + + ops->var.xoffset = 0; + ops->var.yoffset = p->yscroll * vc->vc_font.height; + ops->var.vmode &= ~FB_VMODE_YWRAP; + ops->update_start(info); + fbcon_clear_margins(vc, 1); + scrollback_max -= count; + if (scrollback_max < 0) + scrollback_max = 0; + scrollback_current = 0; +} + +static void fbcon_redraw_move(struct vc_data *vc, struct fbcon_display *p, + int line, int count, int dy) +{ + unsigned short *s = (unsigned short *) + (vc->vc_origin + vc->vc_size_row * line); + + while (count--) { + unsigned short *start = s; + unsigned short *le = advance_row(s, 1); + unsigned short c; + int x = 0; + unsigned short attr = 1; + + do { + c = scr_readw(s); + if (attr != (c & 0xff00)) { + attr = c & 0xff00; + if (s > start) { + fbcon_putcs(vc, start, s - start, + dy, x); + x += s - start; + start = s; + } + } + console_conditional_schedule(); + s++; + } while (s < le); + if (s > start) + fbcon_putcs(vc, start, s - start, dy, x); + console_conditional_schedule(); + dy++; + } +} + +static void fbcon_redraw_blit(struct vc_data *vc, struct fb_info *info, + struct fbcon_display *p, int line, int count, int ycount) +{ + int offset = ycount * vc->vc_cols; + unsigned short *d = (unsigned short *) + (vc->vc_origin + vc->vc_size_row * line); + unsigned short *s = d + offset; + struct fbcon_ops *ops = info->fbcon_par; + + while (count--) { + unsigned short *start = s; + unsigned short *le = advance_row(s, 1); + unsigned short c; + int x = 0; + + do { + c = scr_readw(s); + + if (c == scr_readw(d)) { + if (s > start) { + ops->bmove(vc, info, line + ycount, x, + line, x, 1, s-start); + x += s - start + 1; + start = s + 1; + } else { + x++; + start++; + } + } + + scr_writew(c, d); + console_conditional_schedule(); + s++; + d++; + } while (s < le); + if (s > start) + ops->bmove(vc, info, line + ycount, x, line, x, 1, + s-start); + console_conditional_schedule(); + if (ycount > 0) + line++; + else { + line--; + /* NOTE: We subtract two lines from these pointers */ + s -= vc->vc_size_row; + d -= vc->vc_size_row; + } + } +} + static void fbcon_redraw(struct vc_data *vc, struct fbcon_display *p, int line, int count, int offset) { @@ -1450,6 +1687,7 @@ static bool fbcon_scroll(struct vc_data { struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; struct fbcon_display *p = &fb_display[vc->vc_num]; + int scroll_partial = info->flags & FBINFO_PARTIAL_PAN_OK; if (fbcon_is_inactive(vc, info)) return true; @@ -1466,32 +1704,249 @@ static bool fbcon_scroll(struct vc_data case SM_UP: if (count > vc->vc_rows) /* Maximum realistic size */ count = vc->vc_rows; - fbcon_redraw(vc, p, t, b - t - count, - count * vc->vc_cols); - fbcon_clear(vc, b - count, 0, count, vc->vc_cols); - scr_memsetw((unsigned short *) (vc->vc_origin + - vc->vc_size_row * - (b - count)), - vc->vc_video_erase_char, - vc->vc_size_row * count); - return true; + if (logo_shown >= 0) + goto redraw_up; + switch (p->scrollmode) { + case SCROLL_MOVE: + fbcon_redraw_blit(vc, info, p, t, b - t - count, + count); + fbcon_clear(vc, b - count, 0, count, vc->vc_cols); + scr_memsetw((unsigned short *) (vc->vc_origin + + vc->vc_size_row * + (b - count)), + vc->vc_video_erase_char, + vc->vc_size_row * count); + return true; + + case SCROLL_WRAP_MOVE: + if (b - t - count > 3 * vc->vc_rows >> 2) { + if (t > 0) + fbcon_bmove(vc, 0, 0, count, 0, t, + vc->vc_cols); + ywrap_up(vc, count); + if (vc->vc_rows - b > 0) + fbcon_bmove(vc, b - count, 0, b, 0, + vc->vc_rows - b, + vc->vc_cols); + } else if (info->flags & FBINFO_READS_FAST) + fbcon_bmove(vc, t + count, 0, t, 0, + b - t - count, vc->vc_cols); + else + goto redraw_up; + fbcon_clear(vc, b - count, 0, count, vc->vc_cols); + break; + + case SCROLL_PAN_REDRAW: + if ((p->yscroll + count <= + 2 * (p->vrows - vc->vc_rows)) + && ((!scroll_partial && (b - t == vc->vc_rows)) + || (scroll_partial + && (b - t - count > + 3 * vc->vc_rows >> 2)))) { + if (t > 0) + fbcon_redraw_move(vc, p, 0, t, count); + ypan_up_redraw(vc, t, count); + if (vc->vc_rows - b > 0) + fbcon_redraw_move(vc, p, b, + vc->vc_rows - b, b); + } else + fbcon_redraw_move(vc, p, t + count, b - t - count, t); + fbcon_clear(vc, b - count, 0, count, vc->vc_cols); + break; + + case SCROLL_PAN_MOVE: + if ((p->yscroll + count <= + 2 * (p->vrows - vc->vc_rows)) + && ((!scroll_partial && (b - t == vc->vc_rows)) + || (scroll_partial + && (b - t - count > + 3 * vc->vc_rows >> 2)))) { + if (t > 0) + fbcon_bmove(vc, 0, 0, count, 0, t, + vc->vc_cols); + ypan_up(vc, count); + if (vc->vc_rows - b > 0) + fbcon_bmove(vc, b - count, 0, b, 0, + vc->vc_rows - b, + vc->vc_cols); + } else if (info->flags & FBINFO_READS_FAST) + fbcon_bmove(vc, t + count, 0, t, 0, + b - t - count, vc->vc_cols); + else + goto redraw_up; + fbcon_clear(vc, b - count, 0, count, vc->vc_cols); + break; + + case SCROLL_REDRAW: + redraw_up: + fbcon_redraw(vc, p, t, b - t - count, + count * vc->vc_cols); + fbcon_clear(vc, b - count, 0, count, vc->vc_cols); + scr_memsetw((unsigned short *) (vc->vc_origin + + vc->vc_size_row * + (b - count)), + vc->vc_video_erase_char, + vc->vc_size_row * count); + return true; + } + break; case SM_DOWN: if (count > vc->vc_rows) /* Maximum realistic size */ count = vc->vc_rows; - fbcon_redraw(vc, p, b - 1, b - t - count, - -count * vc->vc_cols); - fbcon_clear(vc, t, 0, count, vc->vc_cols); - scr_memsetw((unsigned short *) (vc->vc_origin + - vc->vc_size_row * - t), - vc->vc_video_erase_char, - vc->vc_size_row * count); - return true; + if (logo_shown >= 0) + goto redraw_down; + switch (p->scrollmode) { + case SCROLL_MOVE: + fbcon_redraw_blit(vc, info, p, b - 1, b - t - count, + -count); + fbcon_clear(vc, t, 0, count, vc->vc_cols); + scr_memsetw((unsigned short *) (vc->vc_origin + + vc->vc_size_row * + t), + vc->vc_video_erase_char, + vc->vc_size_row * count); + return true; + + case SCROLL_WRAP_MOVE: + if (b - t - count > 3 * vc->vc_rows >> 2) { + if (vc->vc_rows - b > 0) + fbcon_bmove(vc, b, 0, b - count, 0, + vc->vc_rows - b, + vc->vc_cols); + ywrap_down(vc, count); + if (t > 0) + fbcon_bmove(vc, count, 0, 0, 0, t, + vc->vc_cols); + } else if (info->flags & FBINFO_READS_FAST) + fbcon_bmove(vc, t, 0, t + count, 0, + b - t - count, vc->vc_cols); + else + goto redraw_down; + fbcon_clear(vc, t, 0, count, vc->vc_cols); + break; + + case SCROLL_PAN_MOVE: + if ((count - p->yscroll <= p->vrows - vc->vc_rows) + && ((!scroll_partial && (b - t == vc->vc_rows)) + || (scroll_partial + && (b - t - count > + 3 * vc->vc_rows >> 2)))) { + if (vc->vc_rows - b > 0) + fbcon_bmove(vc, b, 0, b - count, 0, + vc->vc_rows - b, + vc->vc_cols); + ypan_down(vc, count); + if (t > 0) + fbcon_bmove(vc, count, 0, 0, 0, t, + vc->vc_cols); + } else if (info->flags & FBINFO_READS_FAST) + fbcon_bmove(vc, t, 0, t + count, 0, + b - t - count, vc->vc_cols); + else + goto redraw_down; + fbcon_clear(vc, t, 0, count, vc->vc_cols); + break; + + case SCROLL_PAN_REDRAW: + if ((count - p->yscroll <= p->vrows - vc->vc_rows) + && ((!scroll_partial && (b - t == vc->vc_rows)) + || (scroll_partial + && (b - t - count > + 3 * vc->vc_rows >> 2)))) { + if (vc->vc_rows - b > 0) + fbcon_redraw_move(vc, p, b, vc->vc_rows - b, + b - count); + ypan_down_redraw(vc, t, count); + if (t > 0) + fbcon_redraw_move(vc, p, count, t, 0); + } else + fbcon_redraw_move(vc, p, t, b - t - count, t + count); + fbcon_clear(vc, t, 0, count, vc->vc_cols); + break; + + case SCROLL_REDRAW: + redraw_down: + fbcon_redraw(vc, p, b - 1, b - t - count, + -count * vc->vc_cols); + fbcon_clear(vc, t, 0, count, vc->vc_cols); + scr_memsetw((unsigned short *) (vc->vc_origin + + vc->vc_size_row * + t), + vc->vc_video_erase_char, + vc->vc_size_row * count); + return true; + } } return false; } + +static void fbcon_bmove(struct vc_data *vc, int sy, int sx, int dy, int dx, + int height, int width) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_display *p = &fb_display[vc->vc_num]; + + if (fbcon_is_inactive(vc, info)) + return; + + if (!width || !height) + return; + + /* Split blits that cross physical y_wrap case. + * Pathological case involves 4 blits, better to use recursive + * code rather than unrolled case + * + * Recursive invocations don't need to erase the cursor over and + * over again, so we use fbcon_bmove_rec() + */ + fbcon_bmove_rec(vc, p, sy, sx, dy, dx, height, width, + p->vrows - p->yscroll); +} + +static void fbcon_bmove_rec(struct vc_data *vc, struct fbcon_display *p, int sy, int sx, + int dy, int dx, int height, int width, u_int y_break) +{ + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + struct fbcon_ops *ops = info->fbcon_par; + u_int b; + + if (sy < y_break && sy + height > y_break) { + b = y_break - sy; + if (dy < sy) { /* Avoid trashing self */ + fbcon_bmove_rec(vc, p, sy, sx, dy, dx, b, width, + y_break); + fbcon_bmove_rec(vc, p, sy + b, sx, dy + b, dx, + height - b, width, y_break); + } else { + fbcon_bmove_rec(vc, p, sy + b, sx, dy + b, dx, + height - b, width, y_break); + fbcon_bmove_rec(vc, p, sy, sx, dy, dx, b, width, + y_break); + } + return; + } + + if (dy < y_break && dy + height > y_break) { + b = y_break - dy; + if (dy < sy) { /* Avoid trashing self */ + fbcon_bmove_rec(vc, p, sy, sx, dy, dx, b, width, + y_break); + fbcon_bmove_rec(vc, p, sy + b, sx, dy + b, dx, + height - b, width, y_break); + } else { + fbcon_bmove_rec(vc, p, sy + b, sx, dy + b, dx, + height - b, width, y_break); + fbcon_bmove_rec(vc, p, sy, sx, dy, dx, b, width, + y_break); + } + return; + } + ops->bmove(vc, info, real_y(p, sy), sx, real_y(p, dy), dx, + height, width); +} + static void updatescrollmode(struct fbcon_display *p, struct fb_info *info, struct vc_data *vc) @@ -1664,7 +2119,21 @@ static int fbcon_switch(struct vc_data * updatescrollmode(p, info, vc); - scrollback_phys_max = 0; + switch (p->scrollmode) { + case SCROLL_WRAP_MOVE: + scrollback_phys_max = p->vrows - vc->vc_rows; + break; + case SCROLL_PAN_MOVE: + case SCROLL_PAN_REDRAW: + scrollback_phys_max = p->vrows - 2 * vc->vc_rows; + if (scrollback_phys_max < 0) + scrollback_phys_max = 0; + break; + default: + scrollback_phys_max = 0; + break; + } + scrollback_max = 0; scrollback_current = 0; --- a/drivers/video/fbdev/core/fbcon.h +++ b/drivers/video/fbdev/core/fbcon.h @@ -29,6 +29,7 @@ struct fbcon_display { /* Filled in by the low-level console driver */ const u_char *fontdata; int userfont; /* != 0 if fontdata kmalloc()ed */ + u_short scrollmode; /* Scroll Method */ u_short inverse; /* != 0 text black on white as default */ short yscroll; /* Hardware scrolling */ int vrows; /* number of virtual rows */ @@ -51,6 +52,8 @@ struct fbcon_display { }; struct fbcon_ops { + void (*bmove)(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width); void (*clear)(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width); void (*putcs)(struct vc_data *vc, struct fb_info *info, @@ -149,6 +152,62 @@ static inline int attr_col_ec(int shift, #define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0) #define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1) + /* + * Scroll Method + */ + +/* There are several methods fbcon can use to move text around the screen: + * + * Operation Pan Wrap + *--------------------------------------------- + * SCROLL_MOVE copyarea No No + * SCROLL_PAN_MOVE copyarea Yes No + * SCROLL_WRAP_MOVE copyarea No Yes + * SCROLL_REDRAW imageblit No No + * SCROLL_PAN_REDRAW imageblit Yes No + * SCROLL_WRAP_REDRAW imageblit No Yes + * + * (SCROLL_WRAP_REDRAW is not implemented yet) + * + * In general, fbcon will choose the best scrolling + * method based on the rule below: + * + * Pan/Wrap > accel imageblit > accel copyarea > + * soft imageblit > (soft copyarea) + * + * Exception to the rule: Pan + accel copyarea is + * preferred over Pan + accel imageblit. + * + * The above is typical for PCI/AGP cards. Unless + * overridden, fbcon will never use soft copyarea. + * + * If you need to override the above rule, set the + * appropriate flags in fb_info->flags. For example, + * to prefer copyarea over imageblit, set + * FBINFO_READS_FAST. + * + * Other notes: + * + use the hardware engine to move the text + * (hw-accelerated copyarea() and fillrect()) + * + use hardware-supported panning on a large virtual screen + * + amifb can not only pan, but also wrap the display by N lines + * (i.e. visible line i = physical line (i+N) % yres). + * + read what's already rendered on the screen and + * write it in a different place (this is cfb_copyarea()) + * + re-render the text to the screen + * + * Whether to use wrapping or panning can only be figured out at + * runtime (when we know whether our font height is a multiple + * of the pan/wrap step) + * + */ + +#define SCROLL_MOVE 0x001 +#define SCROLL_PAN_MOVE 0x002 +#define SCROLL_WRAP_MOVE 0x003 +#define SCROLL_REDRAW 0x004 +#define SCROLL_PAN_REDRAW 0x005 + #ifdef CONFIG_FB_TILEBLITTING extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info); #endif --- a/drivers/video/fbdev/core/fbcon_ccw.c +++ b/drivers/video/fbdev/core/fbcon_ccw.c @@ -59,12 +59,31 @@ static void ccw_update_attr(u8 *dst, u8 } } + +static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width) +{ + struct fbcon_ops *ops = info->fbcon_par; + struct fb_copyarea area; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + + area.sx = sy * vc->vc_font.height; + area.sy = vyres - ((sx + width) * vc->vc_font.width); + area.dx = dy * vc->vc_font.height; + area.dy = vyres - ((dx + width) * vc->vc_font.width); + area.width = height * vc->vc_font.height; + area.height = width * vc->vc_font.width; + + info->fbops->fb_copyarea(info, &area); +} + static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vyres = info->var.yres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc,info); region.dx = sy * vc->vc_font.height; @@ -121,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc u32 cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vyres = info->var.yres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -210,7 +229,7 @@ static void ccw_cursor(struct vc_data *v int attribute, use_sw = vc->vc_cursor_type & CUR_SW; int err = 1, dx, dy; char *src; - u32 vyres = info->var.yres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -368,7 +387,7 @@ static int ccw_update_start(struct fb_in { struct fbcon_ops *ops = info->fbcon_par; u32 yoffset; - u32 vyres = info->var.yres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); int err; yoffset = (vyres - info->var.yres) - ops->var.xoffset; @@ -383,6 +402,7 @@ static int ccw_update_start(struct fb_in void fbcon_rotate_ccw(struct fbcon_ops *ops) { + ops->bmove = ccw_bmove; ops->clear = ccw_clear; ops->putcs = ccw_putcs; ops->clear_margins = ccw_clear_margins; --- a/drivers/video/fbdev/core/fbcon_cw.c +++ b/drivers/video/fbdev/core/fbcon_cw.c @@ -44,12 +44,31 @@ static void cw_update_attr(u8 *dst, u8 * } } + +static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width) +{ + struct fbcon_ops *ops = info->fbcon_par; + struct fb_copyarea area; + u32 vxres = GETVXRES(ops->p->scrollmode, info); + + area.sx = vxres - ((sy + height) * vc->vc_font.height); + area.sy = sx * vc->vc_font.width; + area.dx = vxres - ((dy + height) * vc->vc_font.height); + area.dy = dx * vc->vc_font.width; + area.width = height * vc->vc_font.height; + area.height = width * vc->vc_font.width; + + info->fbops->fb_copyarea(info, &area); +} + static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vxres = info->var.xres; + u32 vxres = GETVXRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc,info); region.dx = vxres - ((sy + height) * vc->vc_font.height); @@ -106,7 +125,7 @@ static void cw_putcs(struct vc_data *vc, u32 cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vxres = info->var.xres; + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -193,7 +212,7 @@ static void cw_cursor(struct vc_data *vc int attribute, use_sw = vc->vc_cursor_type & CUR_SW; int err = 1, dx, dy; char *src; - u32 vxres = info->var.xres; + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -350,7 +369,7 @@ static void cw_cursor(struct vc_data *vc static int cw_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; - u32 vxres = info->var.xres; + u32 vxres = GETVXRES(ops->p->scrollmode, info); u32 xoffset; int err; @@ -366,6 +385,7 @@ static int cw_update_start(struct fb_inf void fbcon_rotate_cw(struct fbcon_ops *ops) { + ops->bmove = cw_bmove; ops->clear = cw_clear; ops->putcs = cw_putcs; ops->clear_margins = cw_clear_margins; --- a/drivers/video/fbdev/core/fbcon_rotate.h +++ b/drivers/video/fbdev/core/fbcon_rotate.h @@ -11,6 +11,15 @@ #ifndef _FBCON_ROTATE_H #define _FBCON_ROTATE_H +#define GETVYRES(s,i) ({ \ + (s == SCROLL_REDRAW || s == SCROLL_MOVE) ? \ + (i)->var.yres : (i)->var.yres_virtual; }) + +#define GETVXRES(s,i) ({ \ + (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \ + (i)->var.xres : (i)->var.xres_virtual; }) + + static inline int pattern_test_bit(u32 x, u32 y, u32 pitch, const char *pat) { u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8; --- a/drivers/video/fbdev/core/fbcon_ud.c +++ b/drivers/video/fbdev/core/fbcon_ud.c @@ -44,13 +44,33 @@ static void ud_update_attr(u8 *dst, u8 * } } + +static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width) +{ + struct fbcon_ops *ops = info->fbcon_par; + struct fb_copyarea area; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); + + area.sy = vyres - ((sy + height) * vc->vc_font.height); + area.sx = vxres - ((sx + width) * vc->vc_font.width); + area.dy = vyres - ((dy + height) * vc->vc_font.height); + area.dx = vxres - ((dx + width) * vc->vc_font.width); + area.height = height * vc->vc_font.height; + area.width = width * vc->vc_font.width; + + info->fbops->fb_copyarea(info, &area); +} + static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vyres = info->var.yres; - u32 vxres = info->var.xres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc,info); region.dy = vyres - ((sy + height) * vc->vc_font.height); @@ -142,8 +162,8 @@ static void ud_putcs(struct vc_data *vc, u32 mod = vc->vc_font.width % 8, cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vyres = info->var.yres; - u32 vxres = info->var.xres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -239,8 +259,8 @@ static void ud_cursor(struct vc_data *vc int attribute, use_sw = vc->vc_cursor_type & CUR_SW; int err = 1, dx, dy; char *src; - u32 vyres = info->var.yres; - u32 vxres = info->var.xres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -390,8 +410,8 @@ static int ud_update_start(struct fb_inf { struct fbcon_ops *ops = info->fbcon_par; int xoffset, yoffset; - u32 vyres = info->var.yres; - u32 vxres = info->var.xres; + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); int err; xoffset = vxres - info->var.xres - ops->var.xoffset; @@ -409,6 +429,7 @@ static int ud_update_start(struct fb_inf void fbcon_rotate_ud(struct fbcon_ops *ops) { + ops->bmove = ud_bmove; ops->clear = ud_clear; ops->putcs = ud_putcs; ops->clear_margins = ud_clear_margins; --- a/drivers/video/fbdev/core/tileblit.c +++ b/drivers/video/fbdev/core/tileblit.c @@ -16,6 +16,21 @@ #include <asm/types.h> #include "fbcon.h" +static void tile_bmove(struct vc_data *vc, struct fb_info *info, int sy, + int sx, int dy, int dx, int height, int width) +{ + struct fb_tilearea area; + + area.sx = sx; + area.sy = sy; + area.dx = dx; + area.dy = dy; + area.height = height; + area.width = width; + + info->tileops->fb_tilecopy(info, &area); +} + static void tile_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { @@ -118,6 +133,7 @@ void fbcon_set_tileops(struct vc_data *v struct fb_tilemap map; struct fbcon_ops *ops = info->fbcon_par; + ops->bmove = tile_bmove; ops->clear = tile_clear; ops->putcs = tile_putcs; ops->clear_margins = tile_clear_margins; --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -505,15 +505,15 @@ void xxxfb_fillrect(struct fb_info *p, c } /** - * xxxfb_copyarea - OBSOLETE function. + * xxxfb_copyarea - REQUIRED function. Can use generic routines if + * non acclerated hardware and packed pixel based. * Copies one area of the screen to another area. - * Will be deleted in a future version * * @info: frame buffer structure that represents a single frame buffer * @area: Structure providing the data to copy the framebuffer contents * from one region to another. * - * This drawing operation copied a rectangular area from one area of the + * This drawing operation copies a rectangular area from one area of the * screen to another area. */ void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area) @@ -645,9 +645,9 @@ static const struct fb_ops xxxfb_ops = { .fb_setcolreg = xxxfb_setcolreg, .fb_blank = xxxfb_blank, .fb_pan_display = xxxfb_pan_display, - .fb_fillrect = xxxfb_fillrect, /* Needed !!! */ - .fb_copyarea = xxxfb_copyarea, /* Obsolete */ - .fb_imageblit = xxxfb_imageblit, /* Needed !!! */ + .fb_fillrect = xxxfb_fillrect, /* Needed !!! */ + .fb_copyarea = xxxfb_copyarea, /* Needed !!! */ + .fb_imageblit = xxxfb_imageblit, /* Needed !!! */ .fb_cursor = xxxfb_cursor, /* Optional !!! */ .fb_sync = xxxfb_sync, .fb_ioctl = xxxfb_ioctl, --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -262,7 +262,7 @@ struct fb_ops { /* Draws a rectangle */ void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect); - /* Copy data from area to another. Obsolete. */ + /* Copy data from area to another */ void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region); /* Draws a image to the display */ void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image); Patches currently in stable-queue which might be from deller@xxxxxx are queue-5.16/revert-fbdev-garbage-collect-fbdev-scrolling-acceleration-part-1-from-todo-list.patch queue-5.16/revert-fbcon-disable-accelerated-scrolling.patch queue-5.16/fbcon-add-option-to-enable-legacy-hardware-acceleration.patch