This is a note to let you know that I've just added the patch titled
i40e: Increase delay to 1 s after global EMP reset
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
i40e-increase-delay-to-1-s-after-global-emp-reset.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit e2bd35a0eca46df801b07a771e6b625c614dd299
Author: Jedrzej Jagielski <jedrzej.jagielski@xxxxxxxxx>
Date: Thu Oct 28 13:51:14 2021 +0000
i40e: Increase delay to 1 s after global EMP reset
[ Upstream commit 9b13bd53134c9ddd544a790125199fdbdb505e67 ]
Recently simplified i40e_rebuild causes that FW sometimes
is not ready after NVM update, the ping does not return.
Increase the delay in case of EMP reset.
Old delay of 300 ms was introduced for specific cards for 710 series.
Now it works for all the cards and delay was increased.
Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@xxxxxxxxx>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@xxxxxxxxx>
Tested-by: Gurucharan G <gurucharanx.g@xxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f888a443a067b..eb26cd1f55713 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10130,15 +10130,9 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
}
i40e_get_oem_version(&pf->hw);
- if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
- ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) ||
- hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) {
- /* The following delay is necessary for 4.33 firmware and older
- * to recover after EMP reset. 200 ms should suffice but we
- * put here 300 ms to be sure that FW is ready to operate
- * after reset.
- */
- mdelay(300);
+ if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state)) {
+ /* The following delay is necessary for firmware update. */
+ mdelay(1000);
}
/* re-verify the eeprom if we just had an EMP reset */
