This is a note to let you know that I've just added the patch titled pinctrl: bcm2835: Add support for wake-up interrupts to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch and it can be found in the queue-5.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From foo@baz Thu Jan 27 04:40:37 PM CET 2022 From: Florian Fainelli <f.fainelli@xxxxxxxxx> Date: Tue, 25 Jan 2022 11:42:20 -0800 Subject: pinctrl: bcm2835: Add support for wake-up interrupts To: stable@xxxxxxxxxxxxxxx Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>, Linus Walleij <linus.walleij@xxxxxxxxxx>, Rob Herring <robh+dt@xxxxxxxxxx>, Mark Rutland <mark.rutland@xxxxxxx>, Ray Jui <rjui@xxxxxxxxxxxx>, Scott Branden <sbranden@xxxxxxxxxxxx>, bcm-kernel-feedback-list@xxxxxxxxxxxx (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Eric Anholt <eric@xxxxxxxxxx>, Stefan Wahren <wahrenst@xxxxxxx>, Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx>, Phil Elwell <phil@xxxxxxxxxxxxxxx>, devicetree@xxxxxxxxxxxxxxx (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@xxxxxxxxxxxxxxx (open list), linux-gpio@xxxxxxxxxxxxxxx (open list:PIN CONTROL SUBSYSTEM), linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE) Message-ID: <20220125194222.12783-6-f.fainelli@xxxxxxxxx> From: Florian Fainelli <f.fainelli@xxxxxxxxx> commit 920fecc1aa4591da27ef9dcb338fc5da86b404d7 upstream Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to specifically treat the GPIO interrupts during suspend and resume, and simply implement an irq_set_wake() callback that is responsible for enabling the parent wake-up interrupt as a wake-up interrupt. To avoid allocating unnecessary resources for other chips, the wake-up interrupts are only initialized if we have a brcm,bcm7211-gpio compatibility string. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Link: https://lore.kernel.org/r/20200531001101.24945-5-f.fainelli@xxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 76 +++++++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-) --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -19,6 +19,7 @@ #include <linux/irq.h> #include <linux/irqdesc.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/of_address.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -76,6 +77,7 @@ struct bcm2835_pinctrl { struct device *dev; void __iomem *base; + int *wake_irq; /* note: locking assumes each bank will have its own unsigned long */ unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; @@ -432,6 +434,11 @@ static void bcm2835_gpio_irq_handler(str chained_irq_exit(host_chip, desc); } +static irqreturn_t bcm2835_gpio_wake_irq_handler(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, unsigned reg, unsigned offset, bool enable) { @@ -631,6 +638,34 @@ static void bcm2835_gpio_irq_ack(struct bcm2835_gpio_set_bit(pc, GPEDS0, gpio); } +static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct bcm2835_pinctrl *pc = gpiochip_get_data(chip); + unsigned gpio = irqd_to_hwirq(data); + unsigned int irqgroup; + int ret = -EINVAL; + + if (!pc->wake_irq) + return ret; + + if (gpio <= 27) + irqgroup = 0; + else if (gpio >= 28 && gpio <= 45) + irqgroup = 1; + else if (gpio >= 46 && gpio <= 57) + irqgroup = 2; + else + return ret; + + if (on) + ret = enable_irq_wake(pc->wake_irq[irqgroup]); + else + ret = disable_irq_wake(pc->wake_irq[irqgroup]); + + return ret; +} + static struct irq_chip bcm2835_gpio_irq_chip = { .name = MODULE_NAME, .irq_enable = bcm2835_gpio_irq_enable, @@ -639,6 +674,8 @@ static struct irq_chip bcm2835_gpio_irq_ .irq_ack = bcm2835_gpio_irq_ack, .irq_mask = bcm2835_gpio_irq_disable, .irq_unmask = bcm2835_gpio_irq_enable, + .irq_set_wake = bcm2835_gpio_irq_set_wake, + .flags = IRQCHIP_MASK_ON_SUSPEND, }; static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) @@ -1151,6 +1188,7 @@ static int bcm2835_pinctrl_probe(struct struct resource iomem; int err, i; const struct of_device_id *match; + int is_7211 = 0; BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS); BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS); @@ -1177,6 +1215,7 @@ static int bcm2835_pinctrl_probe(struct return -EINVAL; pdata = match->data; + is_7211 = of_device_is_compatible(np, "brcm,bcm7211-gpio"); pc->gpio_chip = *pdata->gpio_chip; pc->gpio_chip.parent = dev; @@ -1211,6 +1250,15 @@ static int bcm2835_pinctrl_probe(struct GFP_KERNEL); if (!girq->parents) return -ENOMEM; + + if (is_7211) { + pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS, + sizeof(*pc->wake_irq), + GFP_KERNEL); + if (!pc->wake_irq) + return -ENOMEM; + } + /* * Use the same handler for all groups: this is necessary * since we use one gpiochip to cover all lines - the @@ -1218,8 +1266,34 @@ static int bcm2835_pinctrl_probe(struct * bank that was firing the IRQ and look up the per-group * and bank data. */ - for (i = 0; i < BCM2835_NUM_IRQS; i++) + for (i = 0; i < BCM2835_NUM_IRQS; i++) { + int len; + char *name; + girq->parents[i] = irq_of_parse_and_map(np, i); + if (!is_7211) + continue; + + /* Skip over the all banks interrupts */ + pc->wake_irq[i] = irq_of_parse_and_map(np, i + + BCM2835_NUM_IRQS + 1); + + len = strlen(dev_name(pc->dev)) + 16; + name = devm_kzalloc(pc->dev, len, GFP_KERNEL); + if (!name) + return -ENOMEM; + + snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i); + + /* These are optional interrupts */ + err = devm_request_irq(dev, pc->wake_irq[i], + bcm2835_gpio_wake_irq_handler, + IRQF_SHARED, name, pc); + if (err) + dev_warn(dev, "unable to request wake IRQ %d\n", + pc->wake_irq[i]); + } + girq->default_type = IRQ_TYPE_NONE; girq->handler = handle_level_irq; Patches currently in stable-queue which might be from f.fainelli@xxxxxxxxx are queue-5.4/pinctrl-bcm2835-drop-unused-define.patch queue-5.4/arm-dts-gpio-ranges-property-is-now-required.patch queue-5.4/pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch queue-5.4/pinctrl-bcm2835-change-init-order-for-gpio-hogs.patch queue-5.4/pinctrl-bcm2835-refactor-platform-data.patch queue-5.4/pinctrl-bcm2835-match-bcm7211-compatible-string.patch queue-5.4/pinctrl-bcm2835-add-support-for-all-gpios-on-bcm2711.patch