This is a note to let you know that I've just added the patch titled phy: phy-mtk-tphy: add support efuse setting to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: phy-phy-mtk-tphy-add-support-efuse-setting.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit f3af2cb4ed66a3cd3f6c58cf7ff3e20a4ac1fea7 Author: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> Date: Sat Dec 18 16:27:59 2021 +0800 phy: phy-mtk-tphy: add support efuse setting [ Upstream commit 6f2b033cb883f64ad084a75f13634242c7e179a6 ] Due to some SoCs have a bit shift issue that will drop a bit for usb3 phy or pcie phy, fix it by adding software efuse reading and setting, but only support it optionally for version 2/3. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20211218082802.5256-2-chunfeng.yun@xxxxxxxxxxxx Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index cdcef865fe9e5..98a942c607a67 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -12,6 +12,7 @@ #include <linux/iopoll.h> #include <linux/mfd/syscon.h> #include <linux/module.h> +#include <linux/nvmem-consumer.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/phy/phy.h> @@ -41,6 +42,9 @@ #define SSUSB_SIFSLV_V2_U3PHYD 0x200 #define SSUSB_SIFSLV_V2_U3PHYA 0x400 +#define U3P_MISC_REG1 0x04 +#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6) + #define U3P_USBPHYACR0 0x000 #define PA0_RG_U2PLL_FORCE_ON BIT(15) #define PA0_USB20_PLL_PREDIV GENMASK(7, 6) @@ -133,6 +137,8 @@ #define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24) #define U3P_U3_PHYA_REG0 0x000 +#define P3A_RG_IEXT_INTR GENMASK(15, 10) +#define P3A_RG_IEXT_INTR_VAL(x) ((0x3f & (x)) << 10) #define P3A_RG_CLKDRV_OFF GENMASK(3, 2) #define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2) @@ -187,6 +193,19 @@ #define P3D_RG_FWAKE_TH GENMASK(21, 16) #define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16) +#define U3P_U3_PHYD_IMPCAL0 0x010 +#define P3D_RG_FORCE_TX_IMPEL BIT(31) +#define P3D_RG_TX_IMPEL GENMASK(28, 24) +#define P3D_RG_TX_IMPEL_VAL(x) ((0x1f & (x)) << 24) + +#define U3P_U3_PHYD_IMPCAL1 0x014 +#define P3D_RG_FORCE_RX_IMPEL BIT(31) +#define P3D_RG_RX_IMPEL GENMASK(28, 24) +#define P3D_RG_RX_IMPEL_VAL(x) ((0x1f & (x)) << 24) + +#define U3P_U3_PHYD_RSV 0x054 +#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12) + #define U3P_U3_PHYD_CDR1 0x05c #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) #define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) @@ -307,6 +326,11 @@ struct mtk_phy_pdata { * 48M PLL, fix it by switching PLL to 26M from default 48M */ bool sw_pll_48m_to_26m; + /* + * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse, + * support sw way, also support it for v2/v3 optionally. + */ + bool sw_efuse_supported; enum mtk_phy_version version; }; @@ -336,6 +360,10 @@ struct mtk_phy_instance { struct regmap *type_sw; u32 type_sw_reg; u32 type_sw_index; + u32 efuse_sw_en; + u32 efuse_intr; + u32 efuse_tx_imp; + u32 efuse_rx_imp; int eye_src; int eye_vrt; int eye_term; @@ -1040,6 +1068,130 @@ static int phy_type_set(struct mtk_phy_instance *instance) return 0; } +static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + int ret = 0; + + /* tphy v1 doesn't support sw efuse, skip it */ + if (!tphy->pdata->sw_efuse_supported) { + instance->efuse_sw_en = 0; + return 0; + } + + /* software efuse is optional */ + instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells"); + if (!instance->efuse_sw_en) + return 0; + + switch (instance->type) { + case PHY_TYPE_USB2: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u2 intr efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr) { + dev_warn(dev, "no u2 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_dbg(dev, "u2 efuse - intr %x\n", instance->efuse_intr); + break; + + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u3 intr efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp); + if (ret) { + dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp); + if (ret) { + dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr && + !instance->efuse_rx_imp && + !instance->efuse_rx_imp) { + dev_warn(dev, "no u3 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n", + instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp); + break; + default: + dev_err(dev, "no sw efuse for type %d\n", instance->type); + ret = -EINVAL; + } + + return ret; +} + +static void phy_efuse_set(struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + u32 tmp; + + if (!instance->efuse_sw_en) + return; + + switch (instance->type) { + case PHY_TYPE_USB2: + tmp = readl(u2_banks->misc + U3P_MISC_REG1); + tmp |= MR1_EFUSE_AUTO_LOAD_DIS; + writel(tmp, u2_banks->misc + U3P_MISC_REG1); + + tmp = readl(u2_banks->com + U3P_USBPHYACR1); + tmp &= ~PA1_RG_INTR_CAL; + tmp |= PA1_RG_INTR_CAL_VAL(instance->efuse_intr); + writel(tmp, u2_banks->com + U3P_USBPHYACR1); + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV); + tmp |= P3D_RG_EFUSE_AUTO_LOAD_DIS; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RSV); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0); + tmp &= ~P3D_RG_TX_IMPEL; + tmp |= P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp); + tmp |= P3D_RG_FORCE_TX_IMPEL; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL0); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1); + tmp &= ~P3D_RG_RX_IMPEL; + tmp |= P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp); + tmp |= P3D_RG_FORCE_RX_IMPEL; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL1); + + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0); + tmp &= ~P3A_RG_IEXT_INTR; + tmp |= P3A_RG_IEXT_INTR_VAL(instance->efuse_intr); + writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0); + break; + default: + dev_warn(dev, "no sw efuse for type %d\n", instance->type); + break; + } +} + static int mtk_phy_init(struct phy *phy) { struct mtk_phy_instance *instance = phy_get_drvdata(phy); @@ -1050,6 +1202,8 @@ static int mtk_phy_init(struct phy *phy) if (ret) return ret; + phy_efuse_set(instance); + switch (instance->type) { case PHY_TYPE_USB2: u2_phy_instance_init(tphy, instance); @@ -1134,6 +1288,7 @@ static struct phy *mtk_phy_xlate(struct device *dev, struct mtk_phy_instance *instance = NULL; struct device_node *phy_np = args->np; int index; + int ret; if (args->args_count != 1) { dev_err(dev, "invalid number of cells in 'phy' property\n"); @@ -1174,6 +1329,10 @@ static struct phy *mtk_phy_xlate(struct device *dev, return ERR_PTR(-EINVAL); } + ret = phy_efuse_get(tphy, instance); + if (ret) + return ERR_PTR(ret); + phy_parse_property(tphy, instance); phy_type_set(instance); @@ -1196,10 +1355,12 @@ static const struct mtk_phy_pdata tphy_v1_pdata = { static const struct mtk_phy_pdata tphy_v2_pdata = { .avoid_rx_sen_degradation = false, + .sw_efuse_supported = true, .version = MTK_PHY_V2, }; static const struct mtk_phy_pdata tphy_v3_pdata = { + .sw_efuse_supported = true, .version = MTK_PHY_V3, }; @@ -1210,6 +1371,7 @@ static const struct mtk_phy_pdata mt8173_pdata = { static const struct mtk_phy_pdata mt8195_pdata = { .sw_pll_48m_to_26m = true, + .sw_efuse_supported = true, .version = MTK_PHY_V3, };