This is a note to let you know that I've just added the patch titled arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-ls1028a-qds-move-rtc-node-to-the-correct-i.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 123d0fbdae89fdf3f6c64906d575026b4b818540 Author: Biwen Li <biwen.li@xxxxxxx> Date: Tue Dec 14 03:32:38 2021 -0600 arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus [ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ] The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts. Signed-off-by: Biwen Li <biwen.li@xxxxxxx> Signed-off-by: Li Yang <leoyang.lil@xxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index bfd14b64567e4..2f92e62ecafe9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -272,11 +272,6 @@ temperature-sensor@4c { vcc-supply = <&sb_3v3>; }; - rtc@51 { - compatible = "nxp,pcf2129"; - reg = <0x51>; - }; - eeprom@56 { compatible = "atmel,24c512"; reg = <0x56>; @@ -318,6 +313,15 @@ mux: mux-controller { }; +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; +}; + &enetc_port1 { phy-handle = <&qds_phy1>; phy-connection-type = "rgmii-id";