This is a note to let you know that I've just added the patch titled mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: mmc-core-fixup-storing-of-ocr-for-mmc_quirk_nonstd_s.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit cbee119d53c3a5c731c99fc837a2c3442edd499a Author: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Date: Wed Nov 10 18:17:09 2021 +0100 mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO [ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ] The mmc core takes a specific path to support initializing of a non-standard SDIO card. This is triggered by looking for the card-quirk, MMC_QUIRK_NONSTD_SDIO. In mmc_sdio_init_card() this gets rather messy, as it causes the code to bail out earlier, compared to the usual path. This leads to that the OCR doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops. To make the behaviour consistent, let's instead rely on the core to save the OCR in card->ocr during initialization. Reported-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@xxxxxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 68edf7a615be5..5447c47157aa5 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -708,6 +708,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, if (host->ops->init_card) host->ops->init_card(host, card); + card->ocr = ocr_card; + /* * If the host and card support UHS-I mode request the card * to switch to 1.8V signaling level. No 1.8v signalling if @@ -820,7 +822,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, goto mismatch; } } - card->ocr = ocr_card; + mmc_fixup_device(card, sdio_fixup_methods); if (card->type == MMC_TYPE_SD_COMBO) {