This is a note to let you know that I've just added the patch titled
net: amd-xgbe: Toggle PLL settings during rate change
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-amd-xgbe-toggle-pll-settings-during-rate-change.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 1b3fd2d41d3e47d86d8bc1dc04a0307f0b181602
Author: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
Date: Wed Oct 27 15:27:27 2021 +0530
net: amd-xgbe: Toggle PLL settings during rate change
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.
Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@xxxxxxx>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
Acked-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index b2cd3bdba9f89..533b8519ec352 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1331,6 +1331,10 @@
#define MDIO_VEND2_PMA_CDR_CONTROL 0x8056
#endif
+#ifndef MDIO_VEND2_PMA_MISC_CTRL0
+#define MDIO_VEND2_PMA_MISC_CTRL0 0x8090
+#endif
+
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
@@ -1389,6 +1393,10 @@
#define XGBE_PMA_RX_RST_0_RESET_ON 0x10
#define XGBE_PMA_RX_RST_0_RESET_OFF 0x00
+#define XGBE_PMA_PLL_CTRL_MASK BIT(15)
+#define XGBE_PMA_PLL_CTRL_ENABLE BIT(15)
+#define XGBE_PMA_PLL_CTRL_DISABLE 0x0000
+
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index bb6f0dcea6eab..4a4370a470fd1 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1803,12 +1803,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
}
}
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+ XGBE_PMA_PLL_CTRL_MASK,
+ enable ? XGBE_PMA_PLL_CTRL_ENABLE
+ : XGBE_PMA_PLL_CTRL_DISABLE);
+
+ /* Wait for command to complete */
+ usleep_range(100, 200);
+}
+
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
unsigned int s0 = 0;
unsigned int wait;
+ /* Disable PLL re-initialization during FW command processing */
+ xgbe_phy_pll_ctrl(pdata, false);
+
/* Log if a previous command did not complete */
if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
netif_dbg(pdata, link, pdata->netdev,
@@ -1829,7 +1843,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
wait = XGBE_RATECHANGE_COUNT;
while (wait--) {
if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
- return;
+ goto reenable_pll;
usleep_range(1000, 2000);
}
@@ -1839,6 +1853,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
/* Reset on error */
xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+ /* Enable PLL re-initialization */
+ xgbe_phy_pll_ctrl(pdata, true);
}
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
