This is a note to let you know that I've just added the patch titled
net: phy: micrel: make *-skew-ps check more lenient
to the 5.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-phy-micrel-make-skew-ps-check-more-lenient.patch
and it can be found in the queue-5.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 6e8ba3450003ac071baef6946c7dd894aa5afe69
Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Date: Tue Oct 12 12:34:02 2021 +0200
net: phy: micrel: make *-skew-ps check more lenient
[ Upstream commit 67ca5159dbe2edb5dae7544447b8677d2596933a ]
It seems reasonable to fine-tune only some of the skew values when using
one of the rgmii-*id PHY modes, and even when all skew values are
specified, using the correct ID PHY mode makes sense for documentation
purposes. Such a configuration also appears in the binding docs in
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver
should not warn about it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@xxxxxxxxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5c928f827173c..643b1c1827a92 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -863,9 +863,9 @@ static int ksz9031_config_init(struct phy_device *phydev)
MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
tx_data_skews, 4, &update);
- if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII)
+ if (update && !phy_interface_is_rgmii(phydev))
phydev_warn(phydev,
- "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n");
+ "*-skew-ps values should be used only with RGMII PHY modes\n");
/* Silicon Errata Sheet (DS80000691D or DS80000692D):
* When the device links in the 1000BASE-T slave mode only,
